Description
The 6.5×47 Lapua has earned a reputation as one of the most inherently accurate cartridges a precision shooter can build on, and this Redding set is the kind of tooling that lets you actually take advantage of it. Built around interchangeable neck bushings and a straight-line seater, it gives you real control over the two things that matter most at distance: consistent neck tension and dead-straight bullet seating. This is a dedicated neck-sizing setup aimed at folks who sort and prep their brass, not a one-and-done box of general-purpose dies.
What the Redding Competition Bushing Neck Set Does Differently
The star here is the bushing sizing die. The case is fully supported and aligned before sizing even begins, and as the ram rises the resizing bushing self-centers on the neck inside a tight sliding sleeve. Bushings are available in .001-inch increments, so you can tune neck tension to the exact fit your brass and bullets like. The micrometer adjustment on the bushing position also lets you partial-neck size, a trick a lot of benchrest reloaders lean on to keep brass fitting their chamber snugly.
Seating and Body Work on the 6.5×47 Lapua
The Competition Seating Die uses Redding's floating seating stem system, where the fit between bullet guide and stem is tight enough that the stem effectively floats on a column of air. That translates to seating alignment and depth you can trust down to a thousandth. Rounding out the set is a Body Die that full-length resizes the case body and bumps the shoulder for easy chambering without touching the neck, so your carefully set neck tension stays put.
A Few Things Worth Knowing
This set is designed for shooters running brass that has been sorted for neck wall uniformity or neck turned, which is why no sizing button is included. Neck bushings and shellholders are sold separately, so pick your bushing by measuring loaded neck diameter and subtracting about .001. The seating die ships with a standard stem that handles most bullet shapes, and a VLD stem is offered separately if you shoot high-BC pills.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 58479
- UPC: 611760584794
- Caliber: 6.5×47 Lapua
- Set Type: 3-Die Competition Bushing Neck Set
- Dies Included: Competition Bushing Neck Sizing Die, Body Die, Competition Seating Die
- Bullet Diameter: 0.264 in
- Bushing Range (Min/Max): 0.281 in to 0.289 in
- Bushing Increments: .001 in
- Micrometer Adjustment: Neck Sizing Die and Seating Die
- Standard Shellholder: #1
- Thread: 7/8-14
- Country of Manufacture: United States
- Shipping Weight: 1.84 lbs
What’s Included
- Competition Bushing Neck Sizing Die
- Body Die
- Competition Seating Die with standard seating stem
Frequently Asked Questions
Does the Redding Competition Bushing Neck Die Set come with bushings?
No, neck bushings are sold separately so you can match tension to your exact brass and bullet combo. For the 6.5×47 Lapua this set uses bushings in the .281 to .289 range, available in .001-inch increments. To pick your size, measure the neck diameter of a loaded round and subtract about .001.
Why isn't there a sizing button included?
This set is built for shooters who sort their brass for neck wall thickness or neck-turn their cases, so the self-centering bushing handles neck tension on its own. Skipping the expander button keeps the brass from being worked twice and helps hold runout down. If you want to run commercial brass as-is, carbide size button kits are offered separately.
What does the Body Die do in this set?
The Body Die full-length resizes the case body and bumps the shoulder back for smooth chambering without touching the neck. That lets you keep brass fitting your chamber snugly while leaving the neck tension you set with the bushing die undisturbed. It is the piece that makes this a complete setup rather than just a neck sizer.
Will the seating die work with VLD or high-BC bullets?
The Competition Seating Die ships with a standard stem that fits most common bullet profiles. If you shoot VLD or secant ogive match bullets, Redding offers a VLD-profile stem separately that cradles the nose better. One thing to note is that this seater is not intended for compressed powder charges.





Reviews
There are no reviews yet.