Description
If you've ever muscled the press handle trying to pull a stubborn expander through a case neck, the Redding Carbide Size Button Kit in .30 caliber is the fix you've been after. The hard carbide surface glides through the neck instead of dragging against it, so inside neck sizing gets noticeably smoother and you can skip lubricating the inside of the neck altogether. That means less effort on the downstroke and fewer messy steps in your reloading routine.
What Makes the .30 Cal Carbide Button Different
The key here is how the button is mounted. The carbide size button floats freely on the decapping rod, which lets it self-center in the case neck as the case moves through the die. Instead of a fixed steel expander forcing its way through, the floating carbide button finds its own alignment, which helps keep necks concentric and takes a lot of the fight out of the stroke. Folks running military 7.62×51 brass tend to notice the difference right away, since that brass can be tough on standard expanders.
Fitting the Redding Carbide Size Button Kit to Your Dies
This kit is built to upgrade your existing Redding sizing dies, including Full Length, Neck, and Type S models. It's sized for .30 caliber bottleneck cartridges like .308 Winchester, .30-06, .300 Win Mag, and the rest of the .30 family. Swapping it in is a straightforward job on your decap rod, and the kit comes with everything you need to get it set up and keep it running.
Built for the Long Haul
Carbide holds its finish and dimensions far better than plain steel, so once you install it you're set for a long run of loading sessions. The included spare decapping pin is a nice touch too, since pins are the part most likely to need replacing down the road. It's a small upgrade that pays off every single time you pull the handle.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 49307
- UPC: 611760493072
- Caliber: .30 Caliber
- Button Material: Carbide
- Mounting: Free-floating on the decapping rod
- Compatibility: Redding Full Length, Neck, and Type S sizing dies
- Lubrication: Not required for inside neck sizing
- Shipping Weight: 0.05 lbs
What’s Included
- Carbide size button (.30 caliber)
- Retainer
- Spare decapping pin
Frequently Asked Questions
What dies does the Redding Carbide Size Button Kit work with?
It's designed to upgrade Redding sizing dies, including Full Length, Neck, and Type S models. As long as your die uses a standard decapping rod, you can swap in the carbide button. This .30 caliber kit covers the full .30 family of bottleneck cartridges.
Do I still need to lube the inside of the case neck?
No, that's the whole point of the carbide button. The hard carbide surface glides through the neck with far less friction than steel, so you can skip the inside neck lube. Many reloaders find it makes the sizing stroke noticeably easier.
Why does the carbide button float on the decap rod?
The free-floating design lets the button self-center in the case neck as the case passes through the die. That self-centering action helps keep necks concentric and reduces the force needed to pull the case back off the button. It's a simple feature that makes a real difference in feel and consistency.
Will this help with military 7.62×51 brass?
Yes, it's a popular upgrade for folks processing military surplus 7.62×51 brass, which can be rough on standard steel expanders. The carbide button makes resizing that brass quicker and easier. The included spare decapping pin is handy when you're running a lot of cases.



Reviews
There are no reviews yet.