0
0

Redding Bullet Seating Micrometer STD #18 Seat Plug (09078)

UPC: 611760090783

$46.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've already got a standard Redding seating die and you're tired of guessing at seating depth with a lock ring and a slotted screw, this is the upgrade that changes the game. The STD #18 Bullet Seating Micrometer drops right in as a direct replacement for the original seat plug that came with your die, giving you a micrometer top that adjusts in crisp .001-inch increments. A full turn moves the stem .050 inches, so chasing the lands and fine-tuning your jump becomes a matter of reading a dial instead of trial and error.

The STD designation means this plug is ground for traditional, tangent-ogive bullet shapes in bottleneck cartridges. If you're loading classic cup-and-core or standard spitzer bullets, this is the profile you want. For the long, secant-ogive match projectiles, Redding builds a separate VLD version, and there are FLAT and other configurations for straight-wall and handgun work. Matching the right plug number to your die matters, and the #18 corresponds to the number stamped on the original seat plug that shipped with your Redding die.

Why the STD #18 Micrometer Earns Its Spot On The Bench

The real payoff here is repeatability. Once you find the seating depth your rifle likes, you can record the micrometer setting and come right back to it later, even after swapping bullets or pulling the die for another caliber. That takes a ton of the fiddling out of load development and makes switching between recipes quick and reliable.

Fitment Notes For The STD #18 Seat Plug

This micrometer threads into any seating die using the standard 1/2-20 stem thread, which covers most standard Redding seating dies. It is not intended for use with Redding Competition Seating Dies, since those already come with a built-in micrometer. Think of this as the affordable path to competition-style seating control without buying a whole new die set.

Made from quality American steel and built to Redding's usual tolerances, this is a tool that'll hold its settings and keep running load after load.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 09078
  • UPC: 611760090783
  • Model: STD #18 Seat Plug
  • Bullet Profile: Standard (traditional bullet shapes)
  • Cartridge Type: Bottleneck
  • Stem Thread: 1/2-20 TPI
  • Adjustment Increment: 0.001 inch per graduation
  • Full Revolution Travel: 0.050 inch
  • Compatibility: Most standard Redding seating dies
  • Replaces: Original 01078 seat plug
  • Shipping Weight: 0.175 lb

What’s Included

  • Redding Bullet Seating Micrometer STD #18 seat plug (direct replacement seating stem assembly)

Frequently Asked Questions

Will the STD #18 micrometer fit my Redding seating die?

It fits most standard Redding seating dies that use the 1/2-20 stem thread. To confirm, check the number stamped on the top of the original seat plug that came with your die. If it reads #18, this micrometer is the correct direct replacement. It is not meant for Redding Competition Seating Dies, which already have a micrometer built in.

What's the difference between the STD and VLD versions of this seat plug?

The STD plug is contoured for traditional tangent-ogive bullet shapes, which covers most standard cup-and-core and spitzer projectiles. The VLD version is shaped to properly contact the longer, sharper secant ogives found on very-low-drag match bullets. Picking the profile that matches your bullet gives you cleaner contact and helps avoid marking the bullet nose.

How precise is the seating adjustment?

Each graduation on the micrometer moves the seating stem .001 inch, and a full turn equals .050 inch. That lets you dial in seating depth and fine-tune your bullet jump to the lands with real precision. Just as useful, you can record a setting and return to it later for repeatable results.

Why go with a micrometer seat plug instead of a standard seating stem?

A standard stem adjusts by loosening a lock ring and turning a screw, which makes dialing in and recording exact depths a bit of a guessing game. The micrometer top gives you clean, numbered adjustments you can note and repeat across different bullets and loads. It's essentially a way to get competition-style seating control by upgrading the die you already own.

Additional information

UPC

611760090783

Manufacturer

Manufacturer Part Number

09078

Shipping Weight

0.175

Reviews

There are no reviews yet.

Be the first to review “Redding Bullet Seating Micrometer STD #18 Seat Plug (09078)”