Description
If you run a Redding bushing style die, the bushing is what sets your neck diameter, and this is the .335 steel version. It's a small part that does a big job: instead of a fixed sizing die that works the neck harder than it needs to, you pick the exact bushing that gives you just enough tension to hold the bullet. That means less brass working, better case life, and more consistent seating from round to round.
What the .335 Redding Steel Bushing Does
This bushing is machined from heat treated steel and hand polished to a surface hardness of Rc 60 to 62, which keeps sizing effort low and helps it hold its dimension through a lot of loading sessions. It carries the standard 73-style profile, so it freely interchanges in all Redding bushing style neck sizing dies, including the Type S line and the Competition dies. Swap bushings and one die body suddenly covers several neck tension setups without buying anything else.
Picking the Right Redding Bushing Size
Getting the size right is simple with a good micrometer. Measure the outside neck diameter of a loaded round, then subtract about .001 to .002 inch to account for brass spring back and the tension you want on the bullet. If you're shooting moly coated bullets, you may want to go a touch tighter. Redding offers these in .001 inch steps, so once you know your number you can land right on it instead of settling for close enough.
Where This Bushing Earns Its Keep
This is a favorite with precision rifle and bench rest handloaders who treat neck tension as something to tune rather than guess at. Because the bushing self-centers on the case neck and only sizes as much as you tell it to, concentricity tends to improve and runout goes down. It's made in the USA and marked with its size for quick identification when it's sitting in the box with the rest of your set.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 73335
- UPC: 611760733352
- Bushing Diameter: .335 inch
- Material: Heat Treated Steel
- Surface Hardness: Rc 60-62
- Finish: Hand Polished
- Style: 73-Style / Type S
- Outside Diameter: 1/2 inch
- Length: 3/8 inch
- Fits: Redding Bushing Style Neck Sizing Dies, Type S and Competition
- Country of Origin: USA
What’s Included
- One Redding .335 heat treated steel neck sizing bushing
Frequently Asked Questions
What dies does the Redding .335 steel bushing fit?
It fits all Redding bushing style neck sizing dies, including the Type S Full Length, Type S Neck, and Competition sizer dies. The 73-style profile drops straight in, so you can run several tension setups out of one die body just by changing the bushing.
How do I know if .335 is the right bushing size for my brass?
Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract about .001 to .002 inch for brass spring back and bullet tension. That number tells you which bushing to run. If your loaded neck measures around .336 to .337, the .335 is likely your bushing, but your own brass and bullet combo is what decides it.
What's the difference between the steel bushing and the titanium nitride version?
Both are heat treated steel at the core and share the same dimensions and fit. The titanium nitride version adds a surface coating that bumps up hardness and cuts sizing friction a little further, which some handloaders prefer when running without case lube on the neck. The steel bushing shown here is hand polished to Rc 60 to 62 and works great for most setups.
Can I remove the bushing to turn my die into a body die?
Yes. With Redding Type S bushing dies, simply taking the bushing out lets the die work as a body die that bumps the shoulder without touching the neck. That flexibility is one of the reasons the bushing system is so popular with precision loaders.




Reviews
There are no reviews yet.