Description
This is the .285 diameter bushing from Redding's 73 Style steel lineup, and it's the kind of small part that makes a real difference once you start chasing consistency on your bench. Instead of relying on a one-size-fits-all expander, a bushing lets you size the outside of the case neck to a precise diameter, giving you just enough grip on the bullet without overworking the brass.
It's machined from heat-treated steel with the sizing diameter hand-polished to a surface hardness of Rc 60-62. That hardness and polish is what keeps sizing effort low and helps the bushing hold its dimension over thousands of rounds. The .285 refers to the inside sizing diameter, and like the rest of the line it's clearly marked so you can grab the right one at a glance.
Where the Redding .285 Bushing Fits
This bushing shares the standard external dimensions of 1/2 inch outside diameter by 3/8 inch long, so it freely interchanges across all Redding bushing-style dies, including the Type S neck sizing and full-length sizing dies as well as the Competition dies. The bushing self-centers on the case neck inside the die, which helps keep runout low and concentricity tight. You can even run the die as a body die by pulling the bushing out entirely.
Picking the Right Redding 73 Style Bushing
Sizing is the whole game here. The usual method is to seat a bullet in a piece of your fired brass, measure the outside neck diameter with a caliper or micrometer, and subtract about .001 to .002 inch to allow for brass spring-back and proper neck tension. Whether that lands you on a .285 or a size on either side, the beauty of the .001 inch increment system is that you can fine-tune tension until your groups tell you you've got it right. Plenty of reloaders keep a few neighboring sizes on hand to experiment with.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 73285
- UPC: 611760732850
- Style: 73 Style / Type S
- Material: Heat-Treated Steel
- Sizing Diameter: .285 in
- Surface Hardness: Rc 60-62, hand-polished
- External Dimensions: 1/2 in O.D. x 3/8 in long
- Size Increments: .001 in
- Compatibility: All Redding bushing-style dies (Type S & Competition)
- Country of Origin: Made in USA
What’s Included
- One Redding 73 Style .285 heat-treated steel neck sizing bushing
Frequently Asked Questions
What dies does the Redding .285 steel bushing fit?
It fits all Redding bushing-style dies thanks to its standard 1/2 inch O.D. by 3/8 inch long dimensions. That includes the Type S neck sizing dies, Type S full-length sizing dies, and the Competition neck sizing dies. The bushings freely interchange between them.
How do I know if .285 is the right bushing size for me?
Seat a bullet in a piece of your fired brass and measure the outside diameter of the case neck with a caliper or micrometer. Subtract about .001 to .002 inch from that number to account for brass spring-back and the neck tension you want. If that math lands near .285, this is your bushing, and many reloaders keep neighboring sizes on hand to fine-tune.
What's the difference between the steel and titanium nitride bushings?
Both share the same dimensions and interchange in the same dies, and both are hand-polished to a Rc 60-62 surface. This is the plain heat-treated steel version. The titanium nitride bushings add a surface coating that further increases hardness and reduces sizing friction, but the steel version performs great and is a favorite for everyday precision work.
Does using a bushing mean I can skip the expander?
In most cases, yes. The whole point of a bushing is to size the neck precisely on the outside, so many reloaders remove the expander ball entirely when running a bushing die. That approach tends to improve concentricity, especially on brass with consistent neck wall thickness.





Reviews
There are no reviews yet.