Description
Neck tension is one of those little details that separates good handloads from great ones, and the Redding 73 Style Steel Bushing in .266 gives you the control to get it right. This is a single bushing sized at .266 inches, made from heat treated steel with hand polished sizing diameters hardened to Rc 60-62. That polish and hardness keep sizing effort low and leave your case necks clean, which is exactly what you want when you're chasing consistency round after round.
How the Redding .266 Steel Bushing Fits Your Setup
These bushings share a standard footprint, 1/2 inch outside diameter by 3/8 inch long, so they drop into any Redding bushing style neck sizing die. They also interchange with L.E. Wilson style bushings, so if you've already got a mixed drawer of neck sizing gear, this one plays nice. Each bushing is marked with its size, so there's no guessing when you pull it out of the box.
Picking the Right Bushing Size
The idea behind a bushing system is simple: instead of over working your brass, you select a bushing that sizes the neck just enough to hold the bullet properly. To find your size, measure the outside neck diameter of a loaded or dummy cartridge with a good micrometer, then subtract about .001 to .002 inch. That accounts for brass spring back and gives you a proper press fit on the bullet. A touch of case neck lube is recommended and helps the bushing glide without marking the necks.
Built for Precision Reloaders
If you shoot precision rifle, run a benchrest setup, or just want your ammo to be as uniform as possible, this is the kind of component that earns its keep. Redding builds these in the USA, and the fit and finish reflect it. Grab the diameter that matches your chamber and brass, and you'll have a long lasting piece of your reloading kit.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 73266
- UPC: 611760732669
- Diameter: .266 in
- Material: Heat treated steel
- Surface Hardness: Rc 60-62
- Sizing Finish: Hand polished
- Outside Diameter: 1/2 in
- Length: 3/8 in
- Style: 73 Style Neck Sizing Bushing
- Compatibility: Redding bushing style neck dies, interchanges with L.E. Wilson style bushings
- Country of Origin: United States
What’s Included
- One Redding 73 Style .266 heat treated steel neck sizing bushing
Frequently Asked Questions
What dies does the Redding .266 steel bushing fit?
It fits all Redding bushing style neck sizing dies thanks to its standard 1/2 inch O.D. by 3/8 inch long footprint. It also interchanges with L.E. Wilson style bushings, so it works with most common bushing based neck sizing setups.
How do I know if .266 is the right bushing size for my brass?
Measure the outside neck diameter of a loaded or dummy cartridge with a precision micrometer, then subtract about .001 to .002 inch from that measurement. That small reduction accounts for brass spring back and gives you the proper neck tension to hold the bullet. The .266 fits reloaders whose loaded neck measurement lands right in that window.
What is the difference between the steel and titanium nitride Redding bushings?
This is the heat treated steel version, hand polished with a surface hardness of Rc 60-62 to reduce sizing effort. Redding recommends using a little case neck lube with the steel bushings so they glide smoothly and leave the necks clean. The titanium nitride bushings are a separate option, but this listing is the steel bushing.
Do I need lube when using the Redding steel bushing?
Yes, a touch of case neck lube is recommended with the steel bushings. It helps the bushing move over the neck smoothly and keeps it from leaving marks on the brass. A quick pass of lube is all it takes for clean, consistent results.




Reviews
There are no reviews yet.