Description
This is the .255 diameter steel bushing in Redding's 73 Style lineup, and it's the little part that gives bushing dies their whole reason for existing. Instead of oversizing a case neck and then dragging it back over an expander ball, you pick a bushing that sizes the outside of the neck to exactly where you want it. The result is less working of the brass, better concentricity, and neck tension you can actually control. These are hand-polished heat-treated steel with a surface hardness of Rc 60-62, which keeps sizing effort down and gives them a long working life.
How the .255 Bushing Earns Its Keep
The real advantage here is consistency. A standard full-length die has to size every neck down more than necessary to accommodate all brass thicknesses, then set the final dimension with an expander. That extra working hardens the brass and can introduce runout. With this bushing, you skip that step entirely and size the neck to a precise outside diameter in one clean pass. For handloaders chasing tight groups, that control over neck tension is where accuracy gains hide.
Picking the Right Size for Your Load
To figure out whether .255 is your number, measure the outside neck diameter of a loaded round with a micrometer and subtract .001 to .002 inches to allow for brass spring-back and bullet grip. Hunters often run a touch more tension for rounds that get knocked around, while target and F-Class shooters frequently go as light as .001 under. Keep in mind neck wall thickness varies between brass brands, so it's common to own a couple of bushings for the same cartridge and swap based on what you're loading.
Fits the Whole Redding Bushing Family
The .255 freely interchanges across all Redding bushing-style sizing dies, including the popular Type S neck and full-length dies and the Competition Neck Bushing sets. Standard external dimensions are 1/2 inch outside diameter by 3/8 inch long, and each one is clearly marked with its size for quick identification on the bench. Made in the USA.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 73255
- UPC: 611760732553
- Diameter: .255 in
- Material: Heat-treated steel
- Surface Hardness: Rc 60-62, hand-polished
- External Dimensions: 1/2 in OD x 3/8 in long
- Bushing Range Available: .185 in through .368 in in .001 in increments
- Compatibility: All Redding bushing-style neck sizing dies
- Country of Origin: United States
What’s Included
- One Redding 73 Style .255 steel neck sizing bushing
Frequently Asked Questions
Which Redding dies does the .255 bushing fit?
It interchanges with all Redding bushing-style neck sizing dies, including the Type S neck and full-length sizing dies and the Competition Neck Bushing sets. The bushing shares standard external dimensions of 1/2 inch outside diameter by 3/8 inch long, so it drops right in. The die itself is sold separately.
How do I know if .255 is the right bushing size for my brass?
Measure the outside neck diameter of a loaded cartridge with a precision micrometer, then subtract .001 to .002 inches to account for brass spring-back and bullet tension. That number is your bushing size. Since neck wall thickness differs between brass brands, many reloaders keep a couple of sizes on hand and pick based on the brass they're running.
Should I get the steel bushing or the titanium nitride version?
This is the heat-treated steel bushing, hand-polished to Rc 60-62 hardness to keep sizing effort low. The titanium nitride versions add a surface treatment that further reduces friction, which some reloaders prefer for easing stress on the brass. For most handloading, the steel bushing does the job well and is the more economical pick.
Why use a bushing die instead of a standard neck sizing die?
A standard die sizes the neck down more than needed and then sets final dimension by pulling it back over an expander ball, which works the brass harder and can add runout. A bushing sizes the outside of the neck directly to the diameter you choose in one pass. That means less stress on your brass, better concentricity, and neck tension you can fine-tune by simply swapping bushings.





Reviews
There are no reviews yet.