Description
Neck tension is one of those details that separates good handloads from great ones, and the Redding 73 Style Steel Bushing in .254 gives you direct control over it. Instead of over-working your brass with a standard full-diameter neck, you pick the exact bushing that sizes your case necks down just enough to hold the bullet with consistent grip. This one measures .254 of an inch, carries Redding part number 73254, and slips into any of Redding's bushing-style neck sizing dies.
What the .254 Redding Steel Bushing Does for Your Brass
The idea behind bushing sizing is simple but powerful. You size only as much of the neck as you need to, which means less brass movement, less work hardening, and longer case life. By matching the bushing to your loaded neck diameter, usually a couple thousandths under, you set your neck tension precisely rather than leaving it up to a fixed die. For anyone chasing tighter groups or trimming less often, that kind of control pays off at the bench.
Built to Redding's Steel Bushing Standard
These are made from heat-treated steel with sizing diameters that are hand polished to a surface hardness of Rc 60-62, which keeps sizing effort low and the finish smooth on your brass. Every 73 style bushing shares the same external dimensions, a half-inch outside diameter and three-eighths of an inch long, so they freely interchange across the full lineup. Redding builds these throughout a range from .185 to .368 in .001 inch increments, and the size is clearly marked right on the bushing so there's no second-guessing which one you grabbed.
Keep in mind this is a single bushing, not a complete die. You'll need a compatible Redding bushing-style neck sizing die to use it, and most reloaders build out a small set in nearby sizes to fine-tune tension as they develop a load. If you already run a Type S or similar Redding die, the .254 drops right in and you're ready to go. Made in the USA, and true to size the way Redding's reputation suggests.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 73254
- UPC: 611760732546
- Style: 73 Style Heat-Treated Steel
- Sizing Diameter: .254 in
- Surface Hardness: Rc 60-62
- Outside Diameter: 1/2 in
- Length: 3/8 in
- Material: Heat-Treated Steel
- Finish: Hand Polished
- Quantity: 1 Bushing
- Country of Origin: USA
What’s Included
- One Redding 73 Style .254 heat-treated steel neck sizing bushing
Frequently Asked Questions
What size neck does the .254 Redding bushing size to?
This bushing sizes case necks to a .254 inch diameter. To set your neck tension, you generally pick a bushing one to three thousandths under your loaded cartridge neck diameter. Measuring a loaded round first is the best way to confirm the .254 is right for your brass and bullet combination.
Does the Redding 73 Style bushing fit all Redding bushing dies?
Yes. All Redding 73 style bushings share the same external dimensions, a half-inch outside diameter and three-eighths of an inch long, so they interchange freely across Redding's bushing-style neck sizing dies. That includes the Type S line of neck and full-length dies.
What is the difference between the steel 73 style and the titanium nitride bushings?
Both styles share the same dimensions and interchange in the same dies. The 73 style is heat-treated steel hand polished to Rc 60-62, while the titanium nitride version adds a TiN surface treatment that increases hardness further and reduces sizing friction. The steel bushings are the classic, proven choice for most reloaders.
Do I get a die with this bushing?
No, this listing is for the single .254 bushing only. You'll need a compatible Redding bushing-style neck sizing die to use it. Many reloaders buy a few bushings in nearby sizes so they can fine-tune neck tension during load development.




Reviews
There are no reviews yet.