0
0

Redding 73 Style Steel Neck Sizing Bushing .249 Diameter

UPC: 611760732492

$20.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you run a Redding bushing-style neck sizing die, this .249 diameter steel bushing is how you fine-tune the one setting that matters most to accuracy: neck tension. Instead of sizing the neck down more than you need and working the brass hard every cycle, you pick the exact bushing that gives you just the right amount of grip on the bullet. Less brass working means longer case life and more uniform tension round to round, which tends to show up right where you want it, on paper.

Redding makes these from heat-treated steel, and the sizing diameters are hand-polished to a surface hardness of Rc 60-62 so they slide over the neck with minimal effort. Every bushing shares the same external dimensions, a 1/2 inch outside diameter and 3/8 inch length, so it sits loose in the die and self-centers on the case neck as it works. That floating design is a big part of why these dies produce such low runout.

How the .249 Redding Bushing Fits Your Setup

This one is the .249 inch size. The last three digits of the part number tell you the bushing diameter, so 73249 means .249. To pick the right size for your load, measure the outside neck diameter of a loaded round with a good micrometer, then subtract about .001 to .002 inch depending on how much tension you want. Many handloaders keep a few bushings on hand in .001 increments to test what their rifle likes best.

Where the Steel Bushing Earns Its Keep

These interchange freely across the whole Redding bushing-die lineup, so once you own the dies you can build out a range of sizes without buying new tooling. The steel version is the workhorse of the family and handles the vast majority of reloading just fine. Made in the USA, clearly marked with the size for quick ID at the bench, and small enough to keep a whole collection in one spot. For precision rifle shooters chasing tight groups, having the right bushing on hand is one of the simplest upgrades you can make.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 73249
  • UPC: 611760732492
  • Bushing Diameter: .249 inch
  • Material: Heat-Treated Steel
  • Surface Hardness: Rc 60-62
  • Finish: Hand-Polished
  • Outside Diameter: 1/2 inch
  • Length: 3/8 inch
  • Style: 73 Style Neck Sizing Bushing
  • Compatibility: All Redding Bushing-Style Neck Sizing Dies
  • Country of Origin: USA

What’s Included

  • One Redding 73 Style .249 Steel Neck Sizing Bushing

Frequently Asked Questions

What die does the Redding .249 steel bushing fit?

It fits all Redding bushing-style neck sizing dies. Every 73 style bushing shares the same 1/2 inch outside diameter and 3/8 inch length, so it drops in loose and self-centers on the case neck. You will need a Redding bushing die and the appropriate shellholder, which are sold separately.

How do I know if .249 is the right bushing size for my load?

Measure the outside neck diameter of a loaded round using a precision micrometer, then subtract roughly .001 to .002 inch to get your bushing size. The amount you subtract sets your neck tension, with more subtraction giving more grip on the bullet. Many handloaders keep a few bushings in .001 increments to test what their specific rifle shoots best.

What is the difference between the steel bushing and the titanium nitride version?

Both are made from heat-treated steel and share the same dimensions and interchangeability. The titanium nitride version adds a surface treatment that increases hardness further and reduces sizing friction. The plain steel bushing is the standard workhorse and handles the vast majority of reloading without issue.

Does using a Redding bushing really help accuracy?

The idea behind bushing dies is controlling neck tension precisely while working the brass as little as possible. By sizing the neck down only as much as you need, you get more consistent tension round to round and longer case life, both of which support better accuracy. The self-centering bushing design also helps keep neck runout low.

Additional information

UPC

611760732492

Manufacturer

Manufacturer Part Number

73249

Reviews

There are no reviews yet.

Be the first to review “Redding 73 Style Steel Neck Sizing Bushing .249 Diameter”