Description
The Real Avid Bore Boss takes the tangled, oily bore snake and turns it into something you'll actually keep in your pack. It's a single-piece pull-through built for .17 caliber rifles, including the popular 17 HMR, that pairs a phosphor bronze brush with a braided mop on one cable. The brush breaks loose carbon and fouling on the way through, and the mop follows right behind to wipe it out, so one pass does the work of two.
What Makes the Bore Boss Different
The heart of this thing is the Flex-Case handle. The 32-inch cable coils up inside it, which means no loose rope collecting lint and grit at the bottom of your range bag. The case keeps solvent and gunk sealed away from the rest of your gear, then flips open and doubles as an ergonomic grip when it's time to pull. It's made from a tough polycarbonate wrapped in a flexible over-molding, so it can take a beating and won't turn slick in your hand.
Cleaning With the Bore Boss in the Field
Using it comes down to four steps: flip, feed, clip, and pull. You feed the weighted tip down the bore, clip the cable to the handle, and pull it through. That's it. Because there's no rod, no bench, and no loose solvent bottle required, you can run it at the range while the barrel is still warm or after a damp morning chasing small game. It slips into a jacket pocket or the side of a daypack and stays out of the way until you need it.
Sizing and Fit
This version is dialed in specifically for .17 caliber bores, so the brush and mop fit snug for real scrubbing power rather than just sliding through. If you shoot a 17 HMR or another rimfire in that class, this is the one built to match your rifling. Keeping a clean bore is one of the simplest ways to hold onto accuracy round after round, and the Bore Boss makes that easy enough to do every time you shoot.
Key Specifications
- Manufacturer: Real Avid
- Model: Bore Boss
- Manufacturer Part Number: AVBB17
- UPC: 813119012761
- Product Type: Pull-Through Bore Cleaner
- Caliber: .17 Caliber (.177), including 17 HMR
- Cable Length: 32 inches
- Cable Design: Single-piece Dual-Action
- Brush: Phosphor bronze
- Mop: Braided
- Handle: Flex-Case, polycarbonate with flexible over-molding
- Quantity: 1
- Style: Kit
What’s Included
- Bore Boss .17 caliber pull-through cleaning cable with integrated phosphor bronze brush and braided mop
- Flex-Case storage handle
Frequently Asked Questions
Will the Bore Boss work with a 17 HMR rifle?
Yes, this .17 caliber version is built for any .17 bore, including the 17 HMR. The brush and mop are sized to fit that bore snug, so you get real scrubbing contact instead of a loose pass. It's a solid match for 17 HMR, 17 WSM, and other rimfires in that class.
How does the Bore Boss clean the bore in one pass?
The single cable carries a phosphor bronze brush up front and a braided mop right behind it. The brush loosens carbon and fouling as you pull, and the mop follows to wipe it away. That dual-action setup means you don't need a separate brush-then-patch routine.
Do I need cleaning solvent to use the Bore Boss?
You can run it dry for quick field touch-ups, but adding a little solvent to the mop helps cut through heavier fouling. The sealed Flex-Case keeps any oil or solvent off the rest of your gear between uses. It's flexible enough to fit both a fast wipe-down and a deeper clean.
How does the cable stay clean and organized in a range bag?
The 32-inch cable coils up inside the Flex-Case handle when you're done, so it isn't picking up lint and grit like a loose bore snake would. The case snaps closed to protect the brush and mop and keeps everything contained. When you're ready to clean, you flip it open and the same case becomes your pull handle.





Reviews
There are no reviews yet.