0
0

RCBS Small Base 2-Die Set – .30-06 Springfield | MPN 14803

UPC: 076683148032

$54.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're feeding a semi-auto, pump, or lever-action .30-06, this is the die set that keeps your handloads chambering the way they should. RCBS built the small base sizer to squeeze the shoulder and body down a few thousandths tighter than a standard full-length die, which takes the guesswork out of reliable feeding in those tighter actions. It's the kind of insurance that pays off when you're running brass that's been fired in a different rifle or just want every round to seat home without a fight.

What the RCBS Small Base Die Set Does Differently

The sizer die resizes cases slightly below SAAMI minimums, pulling the shoulder and body back just enough to clear snug chambers. It also deprimes the case on the same stroke, so you're knocking out the old primer while you size. One thing worth knowing: small base dies work the brass harder than standard dies, so a good case lube is your friend here if you want to avoid a stuck case.

Sizer and Seater in One RCBS Set

This is a two-die setup. You get the small base sizer with its expander-decapping unit, plus a regular seater die with a seater plug. The seater has a built-in roll crimper, so you can lock a bullet in place at the same time you seat it, which is handy for ammo that's going to get knocked around in a magazine or tube. If you'd rather seat without crimping, just back the die out until the crimp ring clears the case mouth.

Fitting the RCBS Die Set to Your Press

Both dies use the industry-standard 7/8-14 thread, so they'll thread into just about any single-stage or progressive press from RCBS, Hornady, Lee, Lyman, Redding, Dillon, and the rest. The set calls for a #3 shell holder, which is sold separately, so grab one if you don't already have it on the bench. Everything's made in the USA and backed by the RCBS limited lifetime warranty.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number (MPN): 14803
  • UPC: 076683148032
  • Caliber: .30-06 Springfield
  • Die Type: Small Base Sizer, Bullet Seater
  • Number of Dies: 2
  • Thread Size: 7/8"-14
  • Carbide: No
  • Shell Holder: #3 (sold separately)
  • Crimp Type: Roll crimp (built into seater die)
  • Country of Origin: USA
  • Warranty: RCBS Limited Lifetime Warranty

What’s Included

  • Small Base Sizer Die with Expander-Decapping Unit
  • Regular Seater Die with Seater Plug
  • Plastic storage case

Frequently Asked Questions

What's the difference between this RCBS small base die set and a standard full-length set?

A small base die sizes the case shoulder and body a few thousandths tighter than a standard full-length die, pulling it slightly below SAAMI minimums. That extra sizing helps loaded rounds chamber and extract reliably in tighter actions. It's the setup most reloaders reach for when feeding semi-auto, pump, and lever-action .30-06 rifles.

Does the RCBS Small Base Die Set come with a shell holder?

No, the shell holder is sold separately. This .30-06 set uses a #3 shell holder, so pick one up if it's not already on your bench. RCBS makes them in hardened steel for single-stage and turret presses.

Can I seat bullets without crimping using this set?

Yes. The seater die has a built-in roll crimper, but you can skip the crimp by backing the die out until the crimp ring no longer contacts the case mouth. That lets you seat a bullet cleanly without applying a roll crimp when you don't want one.

Will these dies fit my press if it isn't an RCBS press?

They will. Both dies use the industry-standard 7/8-14 thread, which fits nearly every single-stage and progressive press on the market, including Hornady, Lee, Lyman, Redding, and Dillon. RCBS originally set that standard and it's now universal across reloading gear.

Additional information

UPC

076683148032

Manufacturer

Manufacturer Part Number

14803

Caliber/Gauge

.30-06 Springfield

Length

6

Product Type

SMALL BASE

Shipping Weight

1.2938

Reviews

There are no reviews yet.

Be the first to review “RCBS Small Base 2-Die Set – .30-06 Springfield | MPN 14803”