0
0

RCBS Precision Micrometer 7mm-08 Rem Headspace & Seating Depth Gauge

UPC: 076683883223

$86.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The RCBS Precision Micrometer for 7mm-08 Rem is one of those bench tools that quietly earns its keep every time you sit down to load. Instead of guessing where your sizing die is pushing the shoulder or how far off the lands your bullet is sitting, you get a clear, repeatable number. The mic measures from the datum point on the case shoulder to the base of the cartridge, giving you headspace and bullet seating depth readings down to 0.001 inch, all referenced to SAAMI minimum. For anyone chasing consistency in their 7mm-08, that kind of feedback is hard to beat.

How the 7mm-08 Precision Mic Works at the Bench

The tool is caliber specific, which is exactly why it reads so true for the 7mm-08. You drop a fired case into the body primer-end first, thread the headspace nut down until it gently stops against the shoulder, then read the scale. The zero on the body lines up with SAAMI minimum, and every mark above it tells you how much longer your chamber or sized case runs. Swap over to the land nut with the freebore tool and you can find where the bullet ogive meets the lands, giving you a solid starting point for seating depth testing.

Why Reloaders Keep the Precision Mic Handy

A lot of folks use this strictly to check shoulder bump during sizing, measuring a case before and after it runs through the die to confirm they're getting the exact setback they want. It's quick, it doesn't need a modified case or a comparator stack, and it pairs nicely with your regular caliper routine. One thing worth knowing: it takes a light touch. Over-tightening the nut or reading off a cratered primer can throw your numbers, so snug it down gently and let it stop on its own.

Built from steel with a blued finish, the body and nuts hold up to years of bench use. For the handloader who wants safer, more accurate 7mm-08 ammo and longer brass life, this is a tool that pays for itself in better groups and fewer surprises.

Key Specifications

  • Brand: RCBS
  • Caliber: 7mm-08 Rem
  • Tool Type: Headspace & Bullet Seating Depth Gauge
  • Measurement Resolution: 0.001 inch
  • Reference Standard: SAAMI (measures case shoulder datum to base)
  • Construction: Steel with blued finish
  • Caliber Specific: Yes
  • Manufacturer Part Number: 88322
  • UPC: 076683883223
  • Shipping Weight: 0.72 lbs

What’s Included

  • Precision Mic body (caliber specific for 7mm-08 Rem)
  • Headspace nut
  • Land nut
  • Freebore tool
  • Hex key wrench

Frequently Asked Questions

What does the RCBS Precision Micrometer for 7mm-08 Rem actually measure?

It measures from the datum point on the case shoulder to the base of the cartridge, giving you chamber headspace and bullet seating depth down to 0.001 inch. The readings are referenced to SAAMI minimum, so zero on the body equals the SAAMI minimum and every mark above tells you how much longer your case or chamber runs. This makes it easy to set your sizing die for the right shoulder bump and find a seating depth starting point.

Is this Precision Mic only for 7mm-08, or will it work with other cartridges?

This model is caliber specific to 7mm-08 Rem, which is part of why its readings are so accurate for that round. The land nut in particular is cut for the caliber. If you reload other cartridges, RCBS offers separate Precision Mic models matched to those.

Can I use the Precision Mic to check shoulder bump when sizing my 7mm-08 brass?

Yes, and that's one of the most popular ways reloaders use it. You measure a fired case, run it through your sizing die, then measure again to see exactly how much the shoulder moved. It's a fast way to confirm you're getting the setback you want without needing a modified case or a separate comparator.

Why am I getting odd or negative readings on my Precision Mic?

The most common cause is over-tightening the nut when you take your reading. The tool needs a light touch, so let the nut stop against the shoulder on its own rather than cranking it. Cratered or high primers on fired cases can also throw your numbers, so check those before measuring.

Additional information

UPC

076683883223

Manufacturer

Manufacturer Part Number

88322

Shipping Weight

0.7188

Reviews

There are no reviews yet.

Be the first to review “RCBS Precision Micrometer 7mm-08 Rem Headspace & Seating Depth Gauge”