Description
Every reloader makes a mistake eventually. Maybe the charge weight was off, maybe the overall length wasn't right, or maybe you just want to break down some old ammo and reclaim the components. The RCBS Power Pull II is the tool that gets you out of that jam. It's a kinetic bullet puller, which means there's no press setup and no fussing with collets threaded into a die. You drop a cartridge in, rap it on a solid surface like you're swinging a hammer, and the bullet and powder drop safely into the main chamber ready for reuse.
The jump from the original Pow'r Pull to this version is a real upgrade. Instead of a single universal chuck that could get chewed up gripping smaller cases, this kit ships with three different case-holding chucks. That three-jaw design grips the case rim securely across a wide spread of cartridges, and a soft cushion inside keeps the bullet from getting banged up when it releases.
What the Power Pull II Handles
The three chucks cover most centerfire cartridges, roughly from .22 to .45 caliber. On the small end you've got the 5.7x28mm and .22 Hornet, and on the big end it reaches all the way up through the Winchester Short Magnum and Remington Ultra Magnum families. One thing worth knowing up front: it is not made for rimfire ammunition, so keep the .22 LR out of it.
Why Reloaders Keep the Power Pull II on the Bench
The body is a rugged one-piece build with a generous ergonomic handle, so it's comfortable even when you're breaking down a batch. Folks who've run these for years mention the construction holds up well to repeated use, and having three chuck sizes instead of one means you're not damaging a universal collet trying to grip a short case. It's a simple, slow-but-sure tool, and for the money it's one of the handiest things you can keep within arm's reach of your loading setup. RCBS also offers replacement chuck assemblies with o-rings if you ever need them down the road.
Key Specifications
- Manufacturer: RCBS
- Model: Pow'r Pull II
- Manufacturer Part Number: 9412
- UPC: 076683094124
- Product Type: Kinetic (Impact) Bullet Puller
- Caliber Range: Multi-Caliber, 5.7x28mm / .22 Hornet up through WSM and RUM
- Chucks Included: 3 case-holding chucks
- Chuck Design: Three-jaw case rim grip
- Body: Rugged one-piece polymer with aluminum chuck assembly
- Handle: Ergonomic user-friendly grip
- Color: Green
- Length: 15.65 in
- Rimfire Compatible: No, centerfire only
What’s Included
- RCBS Power Pull II kinetic bullet puller body
- 3 case-holding chucks
Frequently Asked Questions
What cartridges does the RCBS Power Pull II work with?
The three included chucks cover most centerfire cartridges, roughly from .22 up to .45 caliber. That range runs from the 5.7x28mm and .22 Hornet on the small end all the way up through the Winchester Short Magnum and Remington Ultra Magnum families on the big end. It is not designed for rimfire ammunition.
How does a kinetic bullet puller like the Power Pull II actually work?
You load a cartridge into the chuck, then rap the puller against a solid surface the same way you'd swing a hammer. The impact drives the case to a stop while inertia keeps the bullet moving, popping it free so the bullet and powder drop into the main chamber. A soft cushion inside keeps the bullet from getting dinged up, so you can reuse the components.
What's the difference between the Power Pull II and the original Pow'r Pull?
The biggest change is the chuck setup. The original came with a single universal chuck that could get damaged gripping smaller cases, while the Power Pull II ships with three different case-holding chucks sized to fit the cartridge you're working with. That improved three-jaw design grips the case rim more securely across a wider range of calibers.
Can I get replacement chucks for the Power Pull II?
Yes. RCBS offers replacement chuck assemblies with o-rings, so if one ever wears out or you want a spare on hand you're covered. There are also standard and magnum chuck assemblies available to match specific cartridge families.



Reviews
There are no reviews yet.