Description
If you shoot a bolt-action .223 Remington and want to squeeze every last reload out of your brass, the RCBS Neck Sizer Die is the tool that gets you there. Instead of working the entire case, this single die sizes only the neck, leaving the shoulder and body exactly as your chamber formed them. That fire-formed fit is what precision reloaders chase, and this die lets you keep it while restoring the neck tension you need to hold a bullet.
It ships as a standalone neck sizing die with an expander-decapping unit built in, so it resizes the neck and knocks out the spent primer in a single pass. The body is steel, hardened and hand polished, cut to the standard 7/8-14 thread so it drops into any common single-stage or turret press. You'll want RCBS Shell Holder #10 to run .223 brass through it. The die is backed by RCBS's lifetime guarantee as stated by the manufacturer.
Why Handloaders Reach for the RCBS Neck Sizer Die
Neck sizing only touches the part of the case that actually needs resizing. Because the body and shoulder stay at their fire-formed dimensions, the brass sees far less stress than it would through a full-length die, which translates to longer case life and often tighter groups. It also runs easier on the press since you're moving a lot less metal. Keep in mind this approach is meant for brass that gets fired in one bolt-action rifle. Semi-autos and brass shared between guns still need full-length sizing to chamber reliably.
Getting the Most From Your 11130 Neck Sizer
Brand-new brass should be full-length sized and fired once before you start neck sizing it, since the neck sizer relies on a case that's already formed to your chamber. From there, a lot of folks neck size for several firings and only break out a full-length die when a case starts to resist chambering. It's a simple, proven process that rewards patience with consistent, accurate ammo and brass that lasts.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 11130
- UPC: 076683111302
- Caliber/Gauge: .223 Rem / 5.56 NATO
- Product Type: Neck Sizer Die Only
- Number of Dies: 1
- Die Material: Steel, hardened and hand polished
- Carbide: No
- Thread Size: 7/8-14
- Recommended Shell Holder: RCBS #10
- Decapping: Yes, includes expander-decapping unit
- Length: 5.95 in
- Dimensions: 1.75 x 4.50 x 5.95 in
- Shipping Weight: 0.7375 lb
What’s Included
- RCBS Neck Sizer Die (.223 Rem / 5.56 NATO)
- Expander-decapping unit
- Plastic storage case
Frequently Asked Questions
What does the RCBS Neck Sizer Die actually size?
It resizes only the neck of the case, just enough to grip the bullet with proper tension. The shoulder and body are left at their fire-formed dimensions, which is where the case life and accuracy benefits come from. The built-in expander-decapping unit also removes the spent primer in the same stroke.
Can I use this die for brass fired in an AR or other semi-auto?
Neck sizing is intended for brass that's fired exclusively in a single bolt-action or single-shot rifle. For semi-autos, or any brass that gets shared between multiple guns, you'll want a full-length die to guarantee reliable chambering. Running neck-sized brass through a gas gun can lead to tough chambering since the body stays fire-formed.
Do I need a shell holder for the 11130 Neck Sizer Die?
Yes, and it isn't included. For .223 Remington you'll want the RCBS Shell Holder #10. The die uses a standard 7/8-14 thread, so it fits common single-stage and turret presses without any adapters.
Can I neck size brand-new brass with this die?
New brass should be full-length sized and fired once first, since neck sizing relies on a case that's already formed to your chamber. After that first firing you can neck size as normal. Many reloaders neck size for several firings, then switch to a full-length die when a case starts to resist chambering.




Reviews
There are no reviews yet.