Description
If you're running a bolt-action .300 Remington Ultra Magnum and loading brass that's already been fired in your rifle, a dedicated neck sizer earns its keep fast. This RCBS die works the neck of the case only and leaves the shoulder and body exactly where your chamber formed them. The result is brass that fits your rifle like a glove, holds the bullet with consistent tension, and lasts through more firings before it needs full-length work.
The die comes with an expander-decapping unit, so it sizes the neck, knocks out the spent primer, and sets the case mouth up for the next bullet in one pass. Because it only touches the neck and doesn't push the shoulder back, you're working the brass less with every cycle. Less working means fewer problems with case head separation down the road and tighter, more repeatable runout for the folks chasing groups at distance.
Where the .300 RUM Neck Sizer Die Earns Its Spot
The .300 RUM runs a .344 inch neck, and this die is cut specifically for that case. It's a true neck sizing die, not a bushing setup, so there are no bushings to buy or swap. Built from hardened die steel and hand-inspected at the factory, it's made to hold tolerances load after load. Keep in mind this is single-rifle brass territory. If you plan to shoot the same ammo across more than one chamber or run a semi-auto, you'll want full-length sizing instead.
Setting Up the RCBS .300 RUM Neck Sizing Die
Setup is straightforward for anyone who's run a sizing die before. It uses the industry-standard 7/8-14 thread, so it drops into just about any single-stage or progressive press from RCBS, Hornady, Lee, Lyman, Redding, Dillon and the rest. You'll need the correct magnum shell holder and a touch of neck lube, then thread it down to contact and set your lock ring. RCBS backs the die with their lifetime guarantee, which tells you how much faith they put in the steel and the machining.
Key Specifications
- Brand: RCBS
- Die Type: Neck Sizer Die
- Caliber: .300 Remington Ultra Magnum (.300 RUM)
- Number of Dies: 1
- Expander/Decapping Unit: Included
- Material: Hardened Die Steel
- Thread Size: 7/8"-14 (industry standard)
- Case Neck Diameter: .344 in
- Warranty: RCBS Lifetime Guarantee
- Country of Origin: Made in USA
- Manufacturer Part Number: 17630
- UPC: 076683176301
What’s Included
- RCBS .300 RUM Neck Sizer Die
- Expander-Decapping Unit
- Plastic storage box
- Instructions
Frequently Asked Questions
Does the RCBS .300 RUM neck sizer die come with a shell holder?
No, the shell holder is sold separately. You'll want the correct magnum shell holder for the .300 RUM rebated rim before you start loading. The die itself includes the expander-decapping unit, so it sizes the neck and de-primes in the same stroke.
Will this neck sizing die fit my press?
Yes, it uses the industry-standard 7/8-14 thread, which fits nearly all single-stage and progressive presses from RCBS, Hornady, Lee, Lyman, Redding, Dillon and others. That thread standard was originally established by RCBS and is now universal across the industry. If your press takes standard dies, this one threads right in.
When should I neck size instead of full-length size my .300 RUM brass?
Neck sizing shines when you're reloading brass that was fired in the same bolt-action rifle and plan to shoot it back through that same chamber. It works the brass less, extends case life, and often tightens up accuracy. If you're loading for a semi-auto or want ammo that chambers across multiple rifles, full-length sizing is the better call.
Is this a bushing-style die?
No, this is a standard RCBS neck sizer die that uses a fixed neck ring and an expander ball to set bullet tension. There are no bushings to buy or swap. If you want to fine-tune neck tension with interchangeable bushings, you'd be looking at RCBS's Gold Medal Match or MatchMaster bushing dies instead.





Reviews
There are no reviews yet.