0
0

RCBS Matchmaster Full-Length Bushing Die Set .25-06 Remington

UPC: 604544653748

$186.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The RCBS Matchmaster Full-Length Bushing Die Set for .25-06 Remington is a two-die set aimed at the handloader who cares about every thousandth. It pairs a full-length bushing sizing die with the Matchmaster Competition seating die, giving you full-length brass support along with the ability to fine-tune neck tension using interchangeable RCBS neck bushings. The bushings are sold separately, which is standard for this style of die and lets you pick the exact size for your brass and your load.

What Sets the Matchmaster .25-06 Sizing Die Apart

The full-length sizer works the whole case back toward spec while the bushing controls neck diameter from the outside. It comes with a titanium carbo-nitride coated expander that cuts down on brass buildup and makes case extraction noticeably smoother. The expander also works the inside of the neck round, which helps with brass that has slightly uneven neck walls. If you prefer to skip inside neck sizing, the expander is removable so the assembly can run as a decapping unit only. To find your bushing size, measure the outside neck diameter of a loaded round and subtract about .002 to .003 inches to account for brass spring back.

Why the Matchmaster Seating Die Gets So Much Praise

The seating die is the standout piece here. It features an exclusive loading window that lets you drop the bullet into the opening and run the press, so there's no balancing a bullet on the case mouth or getting fingers in the way. An internal sleeve holds the bullet in alignment with the case and guides it during seating for excellent concentricity. A large oversize micrometer makes COL adjustments easy to read and dial in at .001 increments, and the free-floating, self-centering stem keeps things square.

Both dies use the standard 7/8-14 thread, so they fit single-stage and turret presses. Machined from proprietary case-hardened die steel, hand polished, and backed by RCBS's limited lifetime warranty, this is a set built to earn a permanent spot on your bench.

Key Specifications

  • Manufacturer: RCBS
  • Caliber: .25-06 Remington
  • Type: 2-Die Full-Length Bushing Set
  • Manufacturer Part Number: 12008
  • UPC: 604544653748
  • Thread: 7/8-14
  • Expander Coating: Titanium Carbo-Nitride
  • Seater Adjustment: Micrometer, .001 inch increments
  • Material: Case-Hardened Proprietary Die Steel
  • Neck Bushings: Interchangeable, sold separately
  • Made In: USA
  • Warranty: Limited Lifetime
  • Shipping Weight: 1.28 lbs

What’s Included

  • Full-length bushing sizing die
  • Matchmaster Competition micrometer seating die
  • Titanium carbo-nitride coated expander/decapping assembly
  • Instruction manual
  • Reloading data sheet

Frequently Asked Questions

Are the neck bushings included with the Matchmaster .25-06 die set?

No, the neck bushings are sold separately, which is normal for bushing-style dies. This lets you match the exact bushing size to your brass and desired neck tension. To find your size, measure the outside neck diameter of a loaded cartridge and subtract roughly .002 to .003 inches for spring back.

What comes in the RCBS Matchmaster Full-Length Bushing Die Set?

This is a two-die set that includes the full-length bushing sizing die and the Matchmaster Competition micrometer seating die. The sizing die ships with a titanium carbo-nitride coated expander and decapping assembly. You also get an instruction manual and a reloading data sheet.

Do these dies fit a standard press?

Yes. Both dies use the standard 7/8-14 thread, so they'll thread into any common single-stage or turret press. There's nothing proprietary about the mounting.

Can I use the sizing die without the expander ball?

You can. The titanium carbo-nitride expander is removable, so you can run the assembly as a decapping unit only if you'd rather set neck tension strictly with the bushing. Keep in mind the expander helps make the inside of the neck round, which is handy for brass with uneven neck wall thickness.

Additional information

UPC

604544653748

Manufacturer

Manufacturer Part Number

12008

Shipping Weight

1.28

Reviews

There are no reviews yet.

Be the first to review “RCBS Matchmaster Full-Length Bushing Die Set .25-06 Remington”