0
0

RCBS MatchMaster Full-Length Bushing Die Set .223 Rem/5.56 (11108)

UPC: 604544653700

$168.99

7 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

RCBS built the MatchMaster line for reloaders who sweat the details, and this .223 Rem/5.56 NATO full-length set is where that effort really shows. The two-die kit gives you a full-length bushing sizing die paired with the micrometer seating die, so you get sized cases with controlled neck tension and seated bullets that run tight on concentricity. It builds on the proven RCBS die design that's been the backbone of a lot of reloading benches for decades.

The sizing die uses an interchangeable neck bushing (sold separately) to dial in exactly how much tension you want on the bullet. To pick the right size, you measure the outside neck diameter of a loaded round and subtract roughly .002 to .003 inch to account for brass spring back. That approach lets you tune neck tension to your brass and your load instead of accepting whatever a standard die gives you.

What Sets the MatchMaster Seating Die Apart

The seating die is the real headliner here. It features a bullet loading window cut into the side, so you drop the projectile in rather than balancing it on the case mouth and guiding it up with your fingertips. Combined with the self-centering, free-floating stem and a large oversize micrometer that adjusts in .001 inch increments, it makes repeatable seating depth easy to nail down. Reviewers who've run these dies consistently point to low runout and tight, predictable seating depth as the payoff.

Fitting the .223 MatchMaster Set to Your Press

Both dies use the standard 7/8"-14 thread, so they'll thread right into any common single-stage or turret press. This set is geared toward load development, long-range shooting, and competition work in .223 Rem and 5.56 NATO, where consistency round to round matters more than speed. It's backed by the RCBS limited lifetime warranty and made in the USA.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 11108
  • UPC: 604544653700
  • Caliber: .223 Rem / 5.56 NATO
  • Die Type: Full-Length Bushing
  • Dies In Set: 2
  • Seating Die: Micrometer adjustable, .001 inch increments
  • Thread: 7/8"-14
  • Neck Bushing: Interchangeable (sold separately)
  • Warranty: Limited Lifetime
  • Origin: Made in USA
  • Shipping Weight: 1.28 lb

What’s Included

  • Full-length bushing sizing die
  • MatchMaster micrometer bullet seating die

Frequently Asked Questions

Does the RCBS MatchMaster .223 die set come with a neck bushing?

No, the neck bushings are sold separately so you can match the exact neck tension you want for your brass and load. To choose the right one, measure the outside neck diameter of a loaded cartridge and subtract about .002 to .003 inch to allow for brass spring back. RCBS offers both bare steel and coated bushings for these dies.

Will this set work in my standard reloading press?

Yes. Both dies use the common 7/8"-14 thread, so they thread into any standard single-stage or turret press. No special press or shell holder adapter is required.

What makes the MatchMaster seating die different from a regular seater?

The seating die has a bullet loading window cut into the side, so you drop the projectile in rather than balancing it on the case mouth with your fingers. A self-centering, free-floating stem and a large oversize micrometer adjusting in .001 inch increments give you repeatable seating depth and low runout. Reloaders running these dies regularly report very consistent, straight ammunition.

Is the RCBS MatchMaster .223 set good for 5.56 NATO brass too?

Yes, it's chambered for .223 Rem and 5.56 NATO, so it handles both. The full-length sizing die returns cases to spec dimensions, which is helpful when you're working with range brass or mixed headstamps. For precision work, dialing in your bushing and seating depth is where this set earns its keep.

Additional information

UPC

604544653700

Manufacturer

Manufacturer Part Number

11108

Caliber/Gauge

.223 REM/5.56 NATO

Shipping Weight

1.28

Reviews

There are no reviews yet.

Be the first to review “RCBS MatchMaster Full-Length Bushing Die Set .223 Rem/5.56 (11108)”