0
0

RCBS Lube-A-Matic Heater 120VAC – Bullet Lube Sizer Heater 80006

UPC: 604544621143

$77.99

11 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you cast your own lead bullets, you already know that cold, stiff lube is one of the biggest headaches on the bench. The RCBS Lube-A-Matic Heater takes that frustration off the table by warming your lube to a steady working temperature, which keeps it flowing through the die holes for clean, consistent application every time you run a bullet through the sizer. It bolts right up to RCBS accessory base plates and stays put, so you spend more time casting and less time fighting gummed-up lube.

What the Lube-A-Matic Heater Does on Your Bench

This heater is built for today's harder, high-temperature lubes that can be a real pain to push through a sizer cold. Warming them up means you can run hard lube sticks without straining your equipment, and the lube goes on evenly instead of skipping grooves. It's the kind of upgrade that pays off the first time you sit down for a long casting session.

Dialing In the Right Temp with the LAM Heater

The built-in rheostat control lets you fine-tune the heat so your lube flows freely without turning runny or leaking out. Most folks find their sweet spot after a little trial and error, keeping the dial at the lowest setting that still lets the lube move easily. Plug it into a standard grounded 110 to 120 volt outlet, give it around ten to twenty minutes to warm up, and you're ready to go. One tip worth remembering: always run it with a sizer or lube attached so the unit doesn't overheat.

Fitment Beyond Just RCBS Gear

The heater is drilled and tapped to mount on the RCBS Lube-A-Matic sizer, and it also fits SAECO, Lyman, and lead bullet sizers from other makers. That flexibility makes it a smart addition whether you're running RCBS equipment or a mix of brands on your bench. It's backed by a two-year limited warranty from RCBS.

Key Specifications

  • Manufacturer: RCBS
  • Model: Lube-A-Matic (LAM) Heater
  • Manufacturer Part Number: 80006
  • UPC: 604544621143
  • Power: 120 VAC (110-125V / 60Hz, US/CN)
  • Plug Type: Type A (USA)
  • Temperature Control: Adjustable rheostat
  • Mounting: RCBS accessory base plates, drilled and tapped
  • Compatibility: RCBS, SAECO, Lyman and other lead bullet sizers
  • Warranty: Limited two-year
  • Shipping Weight: 2.09 lbs

What’s Included

  • RCBS Lube-A-Matic Heater (120 VAC)
  • Instruction manual

Frequently Asked Questions

What sizers does the RCBS Lube-A-Matic Heater fit?

It's designed to mount on the RCBS Lube-A-Matic sizer and RCBS accessory base plates. It also fits SAECO, Lyman, and lead bullet sizers from other manufacturers since it's drilled and tapped for broad compatibility. That makes it a good match whether your bench is all RCBS or a mix of brands.

Why would I need a heater for bullet lube?

Harder, high-temperature lubes can be tough to push through a sizer when they're cold, which leads to uneven application and extra strain on your gear. The LAM Heater warms the lube to a steady working temperature so it flows freely through the die holes. The result is cleaner, more consistent lubing and faster sizing sessions.

How do I set the temperature on the Lube-A-Matic Heater?

It uses a built-in rheostat dial so you can adjust the heat to your specific lube. Plug it into a grounded 110 to 120 volt outlet and allow about ten to twenty minutes to warm up before you start. Keep the dial at the lowest setting that still lets your lube flow without getting runny or leaking.

Can I leave the heater running without a sizer attached?

No, you should always have a lube or sizer mounted while the unit is running. Operating it empty can cause the heater to overheat. Setting it up on your sizer before you power it on is the way to go.

Additional information

UPC

604544621143

Manufacturer

Manufacturer Part Number

80006

Shipping Weight

2.09

Reviews

There are no reviews yet.

Be the first to review “RCBS Lube-A-Matic Heater 120VAC – Bullet Lube Sizer Heater 80006”