Description
The RCBS Little Dandy Powder Rotor #13 is a replacement charge rotor built for the Little Dandy Pistol Powder Measure, and it carries RCBS part number 86013. Each rotor is a fixed-charge design, meaning it's machined to throw one specific volume of powder rather than being dialed in like an adjustable measure. The beauty of that setup is consistency. Once you've confirmed what the rotor throws with your chosen powder, every pull after that drops the same charge, right down the line.
What the #13 Rotor Brings to the Bench
These rotors are cut from steel for a tight, repeatable fit inside the measure body. The #13 sits in the middle of the lineup, which makes it a common pick for a lot of standard pistol loads depending on which powder you're running. Because the Little Dandy meters by volume and not weight, the actual charge thrown will vary with the bulk density of your powder, so the number on the rotor matters less than what your scale confirms.
Swapping Rotors in the Little Dandy
One of the things handloaders appreciate most about this system is that there's no readjustment after a rotor change. You pull one out, drop another in, and you're back to throwing a known charge. Many folks keep several rotors on hand so they can jump between loads without fuss, and the #13 is a frequent addition to that collection. It works with the measure held in hand or mounted to the bench on a powder measure stand for hands-free operation.
A word worth passing along from experienced reloaders: always verify your thrown charges on a scale before loading. The RCBS charge table gives you a solid starting point for matching rotor to powder, but real-world throws can run a touch heavier or lighter depending on the powder. Weigh a few, note what the #13 gives you with your powder, and you'll have a dead-reliable setup. This rotor is intended for smokeless powders and is not for use with black powder.
Key Specifications
- Manufacturer: RCBS
- Model: Little Dandy Powder Rotor #13
- Manufacturer Part Number: 86013
- UPC: 076683860132
- Rotor Size: No. 13
- Material: Steel
- Type: Fixed Charge Volumetric Rotor
- Compatibility: RCBS Little Dandy Pistol Powder Measure
- Powder Type: Smokeless (not for black powder)
- Shipping Weight: 0.2938 lbs
What’s Included
- One RCBS Little Dandy Powder Rotor #13 (86013)
Frequently Asked Questions
What does the Little Dandy Powder Rotor #13 fit?
The #13 rotor is made specifically for the RCBS Little Dandy Pistol Powder Measure. It drops right into the measure body, and since the Little Dandy system is fully interchangeable, you can swap between rotor sizes without any readjustment.
How many grains does the #13 rotor throw?
Because the Little Dandy meters by volume rather than weight, the exact charge depends on the bulk density of the powder you're using. The #13 falls in the mid range of the lineup and will throw different grain weights with different powders. Check the RCBS rotor charge table for a starting point, then confirm the actual throw on your scale.
Do I need to readjust the measure after installing the #13 rotor?
No. One of the main advantages of the Little Dandy system is that there's no readjustment when you change rotors. You simply pull the old one, drop the #13 in, and you're throwing a known charge again.
Can I use the #13 rotor with black powder?
No. This rotor and the Little Dandy measure are designed for smokeless powders only and should not be used with black powder.





Reviews
There are no reviews yet.