Description
If you're running a .416 Ruger and want to take control of your handloads, this RCBS Group D set gives you everything you need to turn fired brass into fresh, reliable ammo. It's a two-die setup that covers the full job: a Full-Length Sizer Die with an Expander-Decapping Unit paired with a Seater Die and bullet seater plug. The sizer resizes the outside of the case, knocks out the spent primer, and expands the neck so it's ready to take a bullet, all in one stroke of the press.
What the .416 Ruger Group D Set Brings to the Bench
The Full-Length Sizer Die works the brass back down to SAAMI minimum cartridge dimensions, which keeps your reloads feeding smoothly in any .416 Ruger chamber. Headspace is held to tight tolerances so the case body length stays right where it should during sizing, and the die is vented to let trapped air and excess lube escape instead of denting your cases. That venting is one of those small details that saves you brass over the long haul, especially with a big case like this one.
Seating and Crimping with the .416 Ruger Dies
The included Seater Die has a built-in roll crimper, so it secures the bullet at the same time it seats it. For a hard-recoiling cartridge like the .416 Ruger, a solid crimp matters since it helps keep bullets from walking under recoil in the magazine. The dies are machined from RCBS proprietary die steel and cut with the standard 7/8-14 thread, so they'll thread right into any common single-stage or turret press.
Why Reloaders Reach for RCBS
RCBS dies have a long reputation for being tough to wear out and backed by a strong warranty, which is a big reason loaders keep coming back to the green boxes. For a cartridge like the .416 Ruger where factory ammo can be scarce and pricey, a quality die set is the gateway to shooting it the way you want. Made in the USA and shipped in the classic green die box.
Key Specifications
- Manufacturer: RCBS
- Cartridge: .416 Ruger
- Die Group: Group D
- Set Type: Full-Length 2-Die Set
- Dies Included: Full-Length Sizer with Expander-Decapping Unit, Seater Die with Bullet Seater Plug
- Thread: Standard 7/8"-14
- Die Material: Proprietary Die Steel
- Crimp: Built-in roll crimper in seater die
- Country of Origin: Made in USA
- Manufacturer Part Number: 13101
- UPC: 076683131010
- Shipping Weight: 1.3 lbs
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug
- RCBS green die box
Frequently Asked Questions
What dies come in the RCBS .416 Ruger Group D set?
This is a two-die set that includes a Full-Length Sizer Die with an Expander-Decapping Unit and a Seater Die with a bullet seater plug. The sizer resizes the case, removes the spent primer, and expands the neck, while the seater handles bullet seating and crimping. Together they cover the core steps of loading .416 Ruger brass.
Does the seater die crimp the bullet?
Yes. The included Seater Die has a built-in roll crimper that secures the bullet at the same time it seats it. That's handy for a hard-recoiling round like the .416 Ruger, where a firm crimp helps keep bullets from shifting under recoil.
Will these dies fit my press?
They use the standard 7/8"-14 thread, which is the industry-standard sizing used on the vast majority of single-stage and turret presses. If your press takes common reloading dies, this set will thread right in. Just be sure your press and shell holder are rated to handle the larger .416 Ruger case.
Does this set size cases full-length or just the neck?
This is a full-length die set, so the sizer works the entire case back down to SAAMI minimum cartridge dimensions. Full-length sizing is the way to go if you're loading for reliable feeding or shooting the same brass across multiple rifles. The die is also vented to prevent case damage from trapped air and excess lube.





Reviews
There are no reviews yet.