0
0

RCBS Full Length 2-Die Set – Group D – .257 Roberts Improved 40

UPC: 076683322012

$95.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The .257 Roberts Improved with its trademark 40 degree shoulder is one of those cartridges that rewards a reloader. Once you blow out standard Roberts brass to that steeper shoulder and reduced body taper, you pick up a worthwhile bump in case capacity and velocity, coming surprisingly close to .25-06 performance while burning less powder. This RCBS Group D set is the tooling that makes it all come together, matched to the Improved chamber dimensions so your sized cases headspace right and feed clean.

This is a two-die set that covers the two core steps of loading a bottleneck case. The full-length sizer die works the outside of the case back to SAAMI minimum dimensions, deprimes the spent primer, and runs the expander ball through the neck to set the proper bullet tension on the way out. The die is vented to let trapped air and excess case lube escape, which keeps you from denting shoulders. The seater die then drops the bullet to your set depth and includes a built-in roll crimper if you want to lock the bullet in place during seating.

What Sets the RCBS .257 Roberts Improved Die Set Apart

RCBS machines these die bodies from proprietary die steel to tight tolerances and hand inspects them before they leave the factory. The expander-decapping assembly locks down so it won't slip during adjustment, and the body knurling gives you a good non-slip grip when you're dialing things in. For a cartridge that's technically an improved design, having dedicated factory dies takes a lot of the guesswork out of case forming.

Press Fit for the .257 Roberts Improved 40 Die Set

Both dies use the industry-standard 7/8-14 thread, so they'll thread into nearly any single-stage or progressive press, whether it's an RCBS, Hornady, Lyman, or similar brand. You'll want the correct shell holder and your own fire-formed Improved brass to get rolling, and a headspace gauge is handy for setting precise shoulder bump on that 40 degree shoulder.

Key Specifications

  • Manufacturer: RCBS
  • Cartridge: .257 Roberts Improved 40 Degree
  • Die Group: Group D
  • Die Type: Full-Length 2-Die Set
  • Dies Included: Full-Length Sizer, Bullet Seater
  • Thread: 7/8-14 Standard
  • Die Material: Proprietary Die Steel
  • Projectile Caliber: .257 (6.5mm)
  • Country of Origin: Made in USA
  • Manufacturer Part Number: 32201
  • UPC: 076683322012

What’s Included

  • Full-Length Sizer Die with Expander-Decapping Unit
  • Seater Die with Bullet Seater Plug
  • RCBS green die box

Frequently Asked Questions

Will the RCBS .257 Roberts Improved die set fit my press?

Yes, both dies use the industry-standard 7/8-14 thread. That means they'll thread into nearly any single-stage or progressive press, including RCBS, Hornady, Lyman, and most other common brands. You will need the correct shell holder separately, since it isn't included in this two-die set.

Does this set form .257 Roberts Improved brass from standard .257 Roberts cases?

The sizing die is cut to the Improved chamber dimensions, but the actual case forming happens by fire-forming standard .257 Roberts brass in your Improved chamber. After firing, the case takes on the 40 degree shoulder and reduced body taper. This set then sizes, deprimes, and reloads that fire-formed brass going forward.

What's the difference between the 40 degree Improved and the standard .257 Roberts?

The Improved version blows the case out to minimize body taper and create the trademark 40 degree shoulder, which adds roughly seven percent case capacity. That translates to higher velocities than the standard Roberts, landing close to .25-06 performance while using less powder. It's often described as one of the better examples of an improved cartridge and a strong all-around choice.

Can the seater die crimp the bullet?

Yes, the seater die has a built-in roll crimper that can secure the bullet at the same time it's seated. For most bolt-action .257 loads you can seat without crimping if you prefer, but the option is there when you want it. You simply adjust the die body to dial in the amount of crimp you're after.

Additional information

UPC

076683322012

Manufacturer

Manufacturer Part Number

32201

Shipping Weight

1.2063

Reviews

There are no reviews yet.

Be the first to review “RCBS Full Length 2-Die Set – Group D – .257 Roberts Improved 40”