Description
The RCBS 40-180-FN Bullet Mould gives handloaders a dependable way to turn lead alloy into uniform .401" 180-grain flat nose bullets right at the casting bench. It's a two-cavity design, so you drop a pair of bullets with every pour and keep your sessions moving. The flat nose profile at this weight is a favorite for 40 S&W, 10mm Auto, and the classic 38-40 Winchester, making it a versatile addition for anyone who shoots those calibers regularly.
What Sets the 40-180-FN Mould Apart
RCBS machines these moulds from solid cast iron blocks to tight tolerances, and the blocks are precision ground square before machining so the cavities stay true. Steel alignment pins keep the two halves mating perfectly, which matters once you've been casting for a few seasons and want the same bullet every time. The 3/16-inch solid steel sprue plate is held in place with tempered steel spring washers and screws, giving you a crisp, clean cut when you knock the sprue loose.
Casting With the RCBS .401" 180-Grain Mould
The finished bullet runs right around .401" nominal diameter with a meplat near .27", a good flat nose for feeding and clean holes on paper. If you plan to size and lube on a Lube-A-Matic, the matching top punch for this mould is the RCBS #558. Keep your alloy and pot temperature steady and this mould rewards you with frosty, well-filled bullets that need little fuss.
A couple of things to plan for before your first pour: this mould does not include handles, so you'll want a set of RCBS mould handles to run it safely. Pair it with a good casting setup and a sizer die in your preferred diameter, and you've got everything you need to feed your 40-caliber guns with bullets you made yourself.
Key Specifications
- Manufacturer: RCBS
- Mould Designation: 40-180-FN
- Bullet Diameter: .401" nominal
- Bullet Weight: 180 grain
- Bullet Type: Flat Nose (FN)
- Caliber: 40 Caliber / 10mm / 38-40 WCF
- Cavity Count: 2 (double cavity)
- Block Material: Solid cast iron, precision ground square
- Sprue Plate: 3/16" thick solid steel
- Alignment: Steel alignment pins
- Recommended Top Punch: RCBS #558
- Approx. Bullet Length: 0.63"
- Approx. Meplat: 0.27"
- Country of Origin: USA
- Manufacturer Part Number: 82066
- UPC: 076683820662
What’s Included
- RCBS 40-180-FN two-cavity bullet mould block
- Solid steel sprue plate with tempered steel spring washers and screws
Frequently Asked Questions
Do mould handles come with the RCBS 40-180-FN?
No, handles are not included with this mould and are sold separately. You'll need a set of RCBS mould handles to run it at the casting bench. Plan on adding those to your order if you don't already have a pair on hand.
What calibers can I cast for with this .401" 180-grain mould?
The .401" flat nose 180-grain bullet works well for 40 S&W, 10mm Auto, and the classic 38-40 Winchester. A good .401" bullet tends to serve across all three, which makes this a flexible mould for anyone who shoots 40-caliber handguns or a 38-40 lever gun or revolver. Final sizing to your chamber and bore will dictate best results.
Which top punch do I need for sizing bullets from this mould?
This mould uses the RCBS #558 top punch when you're sizing and lubing on a Lube-A-Matic. The three-digit number in the mould name points you to the correct punch. The top punch is sold separately.
What is the mould and sprue plate made of?
RCBS machines these blocks from solid cast iron to tight tolerances, with the blocks precision ground square before cutting the cavities. The sprue plate is a 3/16-inch solid steel piece held in place with tempered steel spring washers and screws. Steel alignment pins keep the halves mating cleanly over years of use.





Reviews
There are no reviews yet.