Description
Reloading wheel-gun cartridges gets a whole lot easier with the RCBS Carbide Taper Crimp 3-Die Set in Group B. Built for straight-wall revolver cases, this set covers .38 Special, .357 Magnum, and .357 Remington Maximum, giving you one set of dies that works across three popular cartridges. The big advantage of the carbide sizer is that you skip the case lube step entirely. No greasy brass, no wiping cases down afterward, just drop them in and go. For anyone running a few hundred rounds at a time, that alone saves a good chunk of bench time.
What the RCBS Group B Die Set Does
The set includes three dies that each pull their weight. The carbide sizer die resizes the case and knocks out the spent primer in one stroke, with the carbide ring doing the heavy lifting so you don't need lubricant. The expander die opens the case mouth to proper diameter and puts a slight bell on it, which makes seating a bullet without shaving lead or crumpling brass a non-issue. The seater die then presses the bullet to depth and applies a taper crimp to lock everything in place. All three dies use the standard 7/8-14 thread, so they'll thread right into just about any single-stage, turret, or progressive press on the market.
Running .38 and .357 on the RCBS Carbide Set
One handy touch is the spacer ring that ships with this set. Since the .357 case runs about an eighth of an inch longer than the .38 Special, you can set your dies up for .38, then slip the spacer under the expander and seater dies when you switch to .357. No re-adjusting between the two, which is a real time saver if you load both. You'll need an RCBS #6 shell holder (or Lyman #1 equivalent) to run these dies, and that's sold separately. RCBS backs the set with their lifetime warranty, and these dies are made in the USA from polished, heat-treated steel, so they hold up to years of steady use.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 18215
- UPC: 076683182159
- Caliber: .357 Magnum / .38 Special / .357 Remington Maximum
- Number of Dies: 3
- Die Group: Group B
- Carbide Sizer: Yes
- Crimp Type: Taper Crimp
- Thread Size: 7/8-14
- Shell Holder: RCBS #6 (sold separately)
- Material: Polished, heat-treated steel with carbide ring
- Country of Origin: Made in USA
- Warranty: RCBS Lifetime Limited Warranty
What’s Included
- Carbide sizer die with decapping unit
- Expander die
- Seater die with taper crimp and bullet seater plug
- Die spacer ring
- Storage box
Frequently Asked Questions
Do I need case lube with the RCBS carbide taper crimp die set?
No, that's the main perk of the carbide sizer die. The carbide ring resizes the case without lubricant, so you can skip lubing and cleaning your brass before sizing. It cuts out a messy step and speeds up the whole process.
Will this RCBS Group B set load both .38 Special and .357 Magnum?
Yes. The dies are designed to handle .38 Special, .357 Magnum, and .357 Remington Maximum. The set even includes a spacer ring so you can set up for .38 and slip the ring under the expander and seater dies for .357 without re-adjusting.
What shell holder does this die set require?
You'll need an RCBS #6 shell holder, which also matches a Lyman #1. It's not included in this set and is sold separately. That same shell holder covers .38 Special, .357 Magnum, and .357 Max.
Will these RCBS dies fit my press?
They use the industry-standard 7/8-14 thread, so they'll work in single-stage, turret, and progressive presses from most major brands. If your press accepts standard dies, these will thread right in.




Reviews
There are no reviews yet.