Description
Everybody loads a round wrong now and then, whether it's the wrong powder charge, a seating depth that's off, or a batch you just want to break back down for components. The RCBS Bullet Puller Collet in 6.5mm is the piece that lets you fix those mistakes without wrecking your bullets or your brass. It's caliber-specific to .264/6.5mm projectiles and drops right into the RCBS Standard Bullet Puller, which sells separately.
How the 6.5mm RCBS Collet Does Its Job
This is a collet-style setup, not a kinetic hammer. When you raise the cartridge into the puller and tighten the lever, the collet squeezes down and grips the bullet much like a draw collet on a lathe. Lower the ram and the case pulls away, leaving the bullet behind in one clean motion. For folks breaking down anything more than a handful of rounds, this beats pounding a round against a block over and over. It's also a real time-saver on heavily crimped brass if you bump the bullet in slightly first, then pull.
Fit and Compatibility for the RCBS 6.5mm Puller Collet
The collet is sized for the 6.5mm family, so it covers cartridges like 6.5 Creedmoor, 6.5 PRC, 6.5×55, and 6.5 Grendel that all use .264 diameter bullets. It's made to work with the RCBS Standard Bullet Puller body (part 9440), which uses the industry-standard 7/8-14 thread and fits single-stage and turret presses with that thread size. Keep in mind the collet and the puller body are sold as separate pieces, so you'll want both to get rolling. One note worth passing along: collet pullers want a straight section of bullet shank to grab, so they shine on standard jacketed bullets and are best kept off wadcutters and rimfire rounds.
A Handy Addition to the 6.5mm Reloader's Bench
If you're already loading 6.5mm, this collet earns its spot in the drawer fast. It's a simple, steel-built part that holds up to a lot of use, and it swaps out quickly when you move between calibers. Pulling bullets to salvage components or troubleshoot a load is just part of the reloading game, and this makes that chore painless.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number (MPN): 9423
- UPC: 076683094230
- Caliber: 6.5mm / .264
- Product Type: Bullet Puller Collet
- Thread: 7/8-14 (via RCBS Standard Bullet Puller body)
- Compatible With: RCBS Standard Bullet Puller (9440)
- Function: Pulls jacketed bullets
- Material: Steel
- Finish: Silver / Gray
- Size: Standard
- Quantity: 1
What’s Included
- One RCBS 6.5mm bullet puller collet (part 9423)
Frequently Asked Questions
Do I need anything else to use the RCBS 6.5mm bullet puller collet?
Yes, this is the collet only. You'll need the RCBS Standard Bullet Puller body (part 9440), which holds the collet and threads into your press. The puller body and collet are sold separately.
Which cartridges does the 6.5mm collet work with?
It fits the 6.5mm / .264 bullet family, so it covers popular rounds like 6.5 Creedmoor, 6.5 PRC, 6.5×55 Swede, and 6.5 Grendel. Collets are sized by bullet diameter rather than by a single cartridge, so one 6.5mm collet handles the whole group.
Will this collet puller damage my bullets?
Used correctly, it pulls jacketed bullets cleanly without distorting them. The collet can leave light marks if you overtighten the lever, so set it to grip just firmly enough to hold the bullet while the ram pulls the case away. It's gentler and faster than a kinetic hammer for larger batches.
Does the RCBS collet puller fit my press?
The RCBS Standard Bullet Puller uses the industry-standard 7/8-14 thread, so it mounts in single-stage and turret presses with that thread size just like a reloading die. Thread it in, drop in the right collet, and you're set.




Reviews
There are no reviews yet.