Description
Every reloader eventually pulls a bullet, whether it's a batch of questionable loads, a powder charge you want to recheck, or components worth saving. This .22 caliber collet is the piece that lets your RCBS Standard Bullet Puller do that job on 22 caliber projectiles (.224 diameter). It's machined from steel with a silver finish, sold as a single collet, and sized specifically for .22 cal bullets.
How the RCBS .22 Collet Does Its Work
The magic here is in the draw collet design. As the case is pulled away from the bullet, the collet tightens its grip in much the same way a draw collet locks onto stock in a lathe. That means it holds most bullet lengths and profiles securely and pulls them free without damaging or distorting the jacket. For anyone trying to reuse pricey match projectiles, that gentle grip is the whole point.
Putting the .22 Bullet Puller Collet to Use
Setup is about as simple as reloading gets. You thread the puller body into your press with the correct caliber collet installed, set a cartridge in the shell holder, and raise the ram. Tighten the collet down onto the bullet, then lower the ram and the bullet slides right out of the case. The puller body itself uses the standard 7/8-14 thread, so it fits virtually any single stage press.
What You Need to Know Before Buying
This is the collet only, not the complete puller. If you already run the RCBS Standard Bullet Puller, this is simply the right collet to add for your .22 caliber work. If you're starting from scratch, you'll want to pick up the puller body as well since the two work together as a system. It's a small, inexpensive part that pays for itself the first time you rescue a tray of good bullets from a batch of loads you'd rather take apart.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 9420
- UPC: 076683094209
- Product Type: Bullet Puller Collet
- Caliber: .22 Cal (.224 Diameter)
- Material: Steel
- Finish: Silver
- Compatible With: RCBS Standard Bullet Puller
- Puller Thread Size: 7/8-14
- Size: Standard
- Length: 3.55 in
- Quantity: 1
What’s Included
- One (1) RCBS .22 Caliber Bullet Puller Collet (Model 9420)
Frequently Asked Questions
Does the RCBS .22 Bullet Puller Collet include the puller body?
No, this is the collet only. It's designed to work with the RCBS Standard Bullet Puller, which is sold separately. If you already own the standard puller, this collet simply adds .22 caliber capability to it.
What bullet diameter does this .22 collet fit?
It's sized for .22 caliber bullets, which measure .224 in diameter. That covers common projectiles for cartridges like .223 Remington, 5.56 NATO, .22-250, and similar .224 caliber loads.
Will the RCBS bullet puller damage my bullets when I pull them?
The collet is built to grip the bullet and pull it free without damaging or distorting the jacket, which is the big advantage over an impact style puller. As the case draws away, the collet tightens its hold much like a lathe draw collet. That makes it a good choice when you want to reuse the projectiles.
What press do I need to use this collet with?
The RCBS Standard Bullet Puller body uses the standard 7/8-14 thread, so it threads into virtually any single stage reloading press. Once the puller is in your press, you install this .22 collet to pull .224 caliber bullets.





Reviews
There are no reviews yet.