Description
If you handload the old military workhorses like the 30-40 Krag and the .303 British, the RCBS Shell Holder #7 is the piece that bridges your case and your dies. It snaps into the ram of your press and grips the rim so the case head sits square under the die every single time. That consistency is what keeps your sizing and seating repeatable from the first case to the hundredth.
RCBS machines these from hardened steel, so the holder shrugs off the pressure of full-length sizing and holds its dimensions through years of use. The slot captures 0.125 inch of the case head, which is the spec that keeps your headspacing right where it should be. It's a small part doing an important job, and RCBS builds them to tight tolerances so there's no slop or wobble when the case is seated.
What the RCBS #7 Shell Holder Fits
The #7 covers a nice spread of rimmed cartridges that share the same case head diameter. It's the correct holder for 30-40 Krag, .303 British, and 40-50 Sharps Straight. If you shoot a vintage Krag or a Lee-Enfield and you're reloading your own, this is the number you want on the ram.
Running the #7 on Your Press
This holder is built for single-stage and turret presses, and the standard RCBS snap-in design means it interchanges with other brands using the common press-type fitting. Setup is simple: slide it into the ram slot, run your case up into the die, and let the holder do the aligning. It comes as a single holder sized for the #7 case head, so you'll want the matching die set for your chambering to complete the job. Backed by the RCBS Limited Lifetime Warranty, it's the kind of bench tool you buy once and forget about.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 9207
- UPC: 076683092076
- Shell Holder Number: #7
- Compatible Cartridges: 30-40 Krag, .303 British, 40-50 Sharps Straight
- Material: Hardened Steel
- Finish: Silver
- Case Head Capture Depth: 0.125 inch
- Press Compatibility: Single-Stage and Turret Presses
- Quantity: 1
- Product Type: Shell Holder
- Warranty: RCBS Limited Lifetime Warranty
What’s Included
- One (1) RCBS #7 Shell Holder
Frequently Asked Questions
What cartridges does the RCBS Shell Holder #7 fit?
The #7 is sized for cases that share the 30-40 Krag case head diameter. That covers 30-40 Krag, .303 British, and 40-50 Sharps Straight. These cartridges all use the same rim dimensions, which is why one holder handles the group.
Will the RCBS #7 shell holder work in my non-RCBS press?
Yes. RCBS uses the standard snap-in, press-type design, so the #7 interchanges with other manufacturers' shell holders and drops into virtually any single-stage or turret press. Just slide it into the ram slot and you're ready to size cases.
Does this shell holder come with reloading dies?
No, the shell holder is sold on its own as a single piece. You'll need the matching die set for your specific cartridge, like a 30-40 Krag or .303 British die set, to complete your reloading setup. The holder's job is to grip and align the case head under whichever die you're running.
What does the 0.125 inch capture depth mean?
That's how much of the case head the holder's slot grips while the case is run up into the die. It's the spec RCBS uses to keep your headspacing correct and your case sitting square. The hardened steel construction holds that dimension consistently over a lot of use.





Reviews
There are no reviews yet.