Description
If you cast your own lead bullets, the RCBS Lube-A-Matic-2 is the tool that turns a slow, messy chore into a quick production line. Drop a cast bullet into the sizer die, pull the handle, and it ejects sized and lubed on the upstroke. One motion handles sizing the bullet to the right diameter and packing lube into the grease grooves at the same time. It also seats gas checks, which matters if you shoot higher-velocity cast loads in rifle calibers like .30-30 or .45-70.
What the Lube-A-Matic-2 Does on the Bench
This is a bench-mounted unit, so plan to bolt it down to a solid surface before you start cranking. A fingertip regulator lets you dial in exactly how much lube flows, so you can put grease where it belongs instead of smothering every bullet. Folks who have switched from pan or dip lubing tend to notice how much cleaner and faster the whole operation gets, with far less wax ending up everywhere but the bullet. It runs with RCBS Lube-A-Matic sizer dies, which are precision-honed to within 0.0005 inches for consistent diameter batch after batch.
Getting the Most Out of Your Lube-A-Matic-2
The unit itself is the press and lube reservoir. You will need to pick up the correct sizer die for your bullet diameter and a top punch matched to your bullet nose profile, since those are sold separately. The top punch aligns the bullet and protects the nose during sizing, so matching it to your mould pays off. Many casters run a lube heater underneath when working with harder or carnauba-based lubes, which keeps the flow smooth in cooler shops. Built from metal with the classic RCBS green finish, this is a tool made to last through a lot of reloading sessions.
Key Specifications
- Manufacturer: RCBS
- Model: Lube-A-Matic-2
- Manufacturer Part Number: 80040
- UPC: 076683800404
- Product Type: Bullet Sizer and Luber
- Caliber/Gauge: Multi-Caliber
- Compatible With: Cast Bullets
- Material: Metal
- Finish: Green
- Function: Sizes, Lubricates, and Seats Gas Checks
- Mounting: Bench Mounted
- Capacity: 1
- Quantity: 1
- Shipping Weight: 7.875 lbs
What’s Included
- RCBS Lube-A-Matic-2 Bullet Sizer/Lubricator unit
- Operating handle
Frequently Asked Questions
Does the Lube-A-Matic-2 come with a sizer die and top punch?
No, the sizer die and top punch are sold separately. You'll want to choose a sizer die that matches your bullet's finished diameter and a top punch shaped to your bullet's nose profile. For RCBS moulds, the three-digit number in the mould description tells you which top punch to grab.
Can the Lube-A-Matic-2 seat gas checks?
Yes, it seats gas checks as part of the same sizing stroke. That makes it a handy one-stop setup for higher-velocity cast rifle loads in calibers like .30-30 and .45-70 where gas checks are common. You just need the correct sizer die for your bullet.
Do I need to mount the Lube-A-Matic-2 to a bench?
Yes, this is a bench-mounted lubrisizer, so bolt it to a sturdy surface before you start. You pull the handle down hard on each stroke, so a solid mount keeps everything steady and your bullets consistent. Setup out of the box is straightforward once it's secured.
Will harder bullet lubes flow well in the Lube-A-Matic-2?
The fingertip regulator lets you fine-tune lube flow, but stiffer or carnauba-based lubes can get thick in a cool shop. Many casters run an RCBS or Lyman lube heater underneath the unit to keep things flowing smoothly. Warming the lube a little makes the whole process noticeably easier.




Reviews
There are no reviews yet.