Description
The .280 Remington has always been one of those cartridges handloaders love, flat-shooting, versatile, and easy on the shoulder, but factory ammo can be tough to find on the shelf. That's where this RCBS Group A set earns its keep. It's a two-die setup made for reloading bottleneck cases, giving you everything you need to work your fired .280 Rem brass back into shape and seat fresh bullets with confidence.
What the RCBS .280 Remington Die Set Actually Does
The full-length sizer die resizes the whole case back to SAAMI minimum dimensions, so your reloads chamber smoothly round after round. While it sizes the outside of the case, the expander-decapping unit knocks out the spent primer and opens the neck to accept your next bullet. RCBS drilled vent holes into the die body too, which lets trapped air and excess lube escape instead of denting your brass. Headspace stays held to tight tolerances during sizing, which keeps your case body length consistent.
Seating and Crimping With the 14001 Set
The second die handles bullet seating and comes with a bullet seater plug plus a built-in roll crimper. That lets you seat the bullet and apply crimp in a single stroke, which is handy if you're loading rounds meant to take some recoil or feed through a magazine. Both dies use the standard 7/8-inch-14 thread, so they'll thread right into just about any single-stage press you've already got on the bench.
Built to RCBS Standards
RCBS has been making dies for decades, and these carry the same hardened, hand-polished build quality the brand is known for. Fine knurling on the bodies makes adjustment easy without slipping. One thing worth knowing before your first session: a shell holder is not included, so grab the correct one for the .280 Rem case head if you don't already have it in your kit.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number (MPN): 14001
- UPC: 076683140012
- Caliber: .280 Remington (7mm Express Rem)
- Product Type: Full-Length 2-Die Set
- Series: Group A
- Dies In Set: 2
- Die Type: Full-Length Sizer / Bullet Seater
- Thread Size: 7/8-inch-14
- Crimp Type: Built-in Roll Crimp
- Shell Holder Included: No
- Shipping Weight: 1.3 lbs
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug and built-in roll crimper
- Instructions
- Warranty card
- Plastic storage case
Frequently Asked Questions
Does the RCBS .280 Remington die set come with a shell holder?
No, a shell holder is not included with this set. RCBS sells shell holders separately, so you'll want to pick up the correct one for the .280 Remington case head before your first loading session. The good news is the .280 Rem shares its case head with the .30-06 family, so many reloaders already have the right one on hand.
Will these dies fit my reloading press?
Yes. Both dies use the standard 7/8-inch-14 thread, which is the universal size for single-stage and most progressive presses. If you've been loading other rifle cartridges already, they'll thread right in without any extra adapters.
What does the full-length sizer die do compared to a neck sizer?
The full-length sizer resizes the entire case body and neck back down to SAAMI minimum dimensions, not just the neck. This gives you reliable chambering in any rifle, which is ideal if you shoot the same brass across more than one firearm or want dependable feeding. It also de-primes and expands the neck in the same stroke to ready the case for a new bullet.
Can I crimp my bullets with this set?
Yes. The seater die has a built-in roll crimper, so you can seat the bullet and apply crimp at the same time if your loads call for it. For bullets without a cannelure or precision target loads, you can simply back the crimp off and seat without crimping.





Reviews
There are no reviews yet.