0
0

RCBS 12501 Full-Length 2-Die Set .257 Roberts – Group A

UPC: 076683125019

$52.99

15 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The RCBS 12501 is a two-die set built for anyone loading .257 Roberts, one of those classic quarter-bore cartridges that rewards a careful handloader. This Group A set covers the full cycle of case prep and bullet seating for bottleneck brass, and it threads into any standard reloading press using the common 7/8-14 TPI standard. If you already own RCBS gear or plan to, these dies drop right into the same routine.

What the RCBS 12501 Dies Actually Do

The set pairs a full-length sizer with a bullet seater. The sizer die works the outside of the case back down to SAAMI minimum dimensions, deprimes the spent primer, and expands the case neck so it is ready to accept a new bullet. Headspace is held to tight tolerances during that process, which keeps your brass consistent from one loading to the next. The sizer also runs an expander-decapping unit, so you are resizing and knocking out the old primer in a single stroke.

Crimping and Seating With the 12501 Set

The seater die includes a bullet seater plug and a built-in roll crimper. That lets you set your seating depth and lock the bullet in place at the same time, which is handy for hunting loads or anything you want to run hard without worrying about bullet setback. Vent holes in the die bodies let trapped air and excess lube escape, so you avoid the dented shoulders that can ruin good brass.

Built Like RCBS Gear Should Be

These are machined from polished, heat-treated steel, so they hold up to years of use and keep their dimensions. RCBS has been turning out reloading equipment for decades, and their die sets have a solid reputation on the bench for quality and repeatability. Keep in mind the shell holder is sold separately, so grab the correct one for the .257 Roberts case head if you do not already have it in your kit.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 12501
  • UPC: 076683125019
  • Caliber: .257 Roberts
  • Product Type: Full-Length 2-Die Set
  • Die Series: Group A – Popular Rifle Cartridges
  • Dies in Set: 2 (Full-Length Sizer and Seater)
  • Thread Size: Standard 7/8-14 TPI
  • Material: Polished, Heat-Treated Steel
  • Crimp Type: Built-in Roll Crimp
  • Case Type: Bottleneck
  • Warranty: RCBS Lifetime Guarantee

What’s Included

  • Full-length sizer die with expander-decapping unit
  • Seater die with bullet seater plug and built-in roll crimper

Frequently Asked Questions

Does the RCBS 12501 die set come with a shell holder?

No, the shell holder is sold separately. You will need the correct shell holder sized for the .257 Roberts case head before you can run brass through the dies. If you already reload similar cartridges, check your kit since you may have the right one on hand.

Will these dies fit my reloading press?

Yes, the RCBS 12501 uses the industry-standard 7/8-14 threading, so it will thread into any standard single-stage or progressive press. That includes RCBS presses as well as other major brands that use the same thread spec.

What is included in this .257 Roberts die set?

The set includes a full-length sizer die with an expander-decapping unit and a seater die with a bullet seater plug. The sizer resizes the case, deprimes, and expands the neck, while the seater sets the bullet and applies a roll crimp. It covers everything you need to size and seat for .257 Roberts aside from the shell holder.

Does the seater die crimp the bullet?

Yes, the seater die has a built-in roll crimper that locks the bullet in place as it is seated. This is useful for hunting loads or any ammo where you want extra security against bullet movement under recoil.

Additional information

UPC

076683125019

Manufacturer

Manufacturer Part Number

12501

Caliber/Gauge

.257 Roberts

Length

6

Product Type

Full Length Die Set

Shipping Weight

1.2063

Reviews

There are no reviews yet.

Be the first to review “RCBS 12501 Full-Length 2-Die Set .257 Roberts – Group A”