Description
Radian doesn't do half measures, and the Model 1 Builder Kit in 15.5-inch Radian Grey is proof of that. This is a matched receiver package built around the AX556 lower, a billet Model 1 upper, and a long 15.5-inch Magpul M-LOK handguard, all wearing the same Grey finish so your build looks like it left the factory as one piece. It's aimed at anyone who wants a top-tier ambidextrous platform without hunting down and matching parts one at a time.
What Sets the AX556 Lower Apart
The heart of this kit is Radian's patented A-DAC (Ambidextrous Dual Action Catch) system. It lets a right-handed shooter lock the bolt to the rear without ever pulling a hand off the fire control. You pull the charging handle back, press the right-side magazine release button, and let the charging handle go. The lower is machined from billet 7075-T6 aluminum with an integral trigger guard and a flared magazine well for faster reloads, and it ships with the Talon 45/90 ambidextrous safety, a left-side mag release, a right-side bolt release, and Radian's enhanced takedown pin set. The SART spring-loaded tensioner also takes out the upper-to-lower wobble a lot of builds fight with.
Building on the Model 1 Upper and Handguard
The Model 1 upper and 15.5-inch handguard are CNC machined as a matching set and reinforced in the critical areas for extra rigidity. The upper comes assembled with a dust cover, hand guard anti-rotation pin, and a lightweight forward assist. The handguard runs Magpul M-LOK slots and clamps to the barrel nut with four black-nitride steel cross bolts, so mounting lights, bipods, and hand stops is straightforward. Every edge is blended smooth, which you notice the first time you run your support hand down the rail.
The kit also throws in the Raptor-SD ambidextrous charging handle, which uses a vented shaft to redirect gas away from your face, handy when running a suppressor. Since there's no barrel or bolt carrier included, you get full freedom to spec the rest of the build in .223, 5.56, 300 Blackout, or any standard AR-15 cartridge you want to run.
Key Specifications
- Manufacturer: Radian Weapons
- Model: Model 1 Builder Kit
- Manufacturer Part Number: R0404
- UPC: 817093023874
- Color / Finish: Radian Grey
- Handguard Length: 15.5 inch
- Handguard Interface: Magpul M-LOK
- Lower Receiver: AX556 A-DAC 15, fully ambidextrous
- Upper Receiver: Model 1 billet, matched set
- Material: Billet 7075-T6 aluminum
- Charging Handle: Raptor-SD ambidextrous
- Safety Selector: Radian Talon 45/90 ambidextrous
- Caliber Compatibility: Standard AR-15 platform (.223 / 5.56 and more)
- ATF Type: Receiver
- Shipping Weight: 5.95 lbs
What’s Included
- 1x Model 1 billet upper receiver with dust cover, anti-rotation pin and lightweight forward assist installed
- 1x 15.5-inch handguard with Magpul M-LOK interface
- 1x Radian AX556 lower receiver
- 1x Raptor-SD ambidextrous charging handle
- 1x Radian Talon 45/90 ambidextrous safety selector
- 1x Ambidextrous bolt catch and release
- 1x Ambidextrous magazine release
- 1x Enhanced takedown pin set
- 1x Aluminum barrel nut
- 1x Barrel nut wrench
- 4x Handguard cross bolts with washers and nuts
Frequently Asked Questions
Does the Radian Model 1 Builder Kit include a barrel or bolt carrier group?
No, this is a receiver set, so it does not come with a barrel, bolt carrier group, gas system, or lower parts kit trigger components. It gives you the matched upper, lower, handguard, and ambidextrous controls, and you supply the rest. That's part of the appeal, since you can spec the barrel and BCG for whatever caliber and length you're chasing.
What makes the AX556 lower in this kit different from a standard ambi lower?
The AX556 uses Radian's patented A-DAC (Ambidextrous Dual Action Catch) system. It lets a right-handed shooter lock the bolt to the rear without taking their firing hand off the controls by pulling the charging handle back and pressing the right-side magazine release. It also has the Talon 45/90 safety, a flared magwell, and the SART tensioner to cut down on upper-to-lower wobble.
Will the 15.5-inch handguard work with M-LOK accessories?
Yes, the handguard uses the Magpul M-LOK slot system, so any M-LOK-compatible light, bipod, sling mount, or hand stop will bolt right on. It clamps to the barrel nut with four black-nitride steel cross bolts for a solid hold. The 15.5-inch length gives you plenty of real estate for accessories and a longer support-hand grip.
Is this kit good for a suppressed build?
It's well suited to it. The included Raptor-SD charging handle has a vented shaft that redirects gas away from your face, which is exactly what you want when running a can. Pair that with the ambidextrous controls and it makes for a clean, comfortable suppressed setup.




Reviews
There are no reviews yet.