Description
The Leupold QRW2 34mm High Matte rings are quick-release scope rings built for folks running a 34mm maintube and needing extra clearance for a big objective bell. These are part of Leupold's Cross-Slot mounting family, so they drop right onto QRW or PRW bases and any other Weaver or Picatinny style cross-slot rail. The real draw here is the quick-detach lever system. Flip the lever forward and an eccentric on the lever shaft grabs the base, pulling the ring down and forward until it locks solid into its zero position. That means you can pull your optic for storage or travel and clamp it back on landing within a half MOA of where you left off.
What Sets the QRW2 Apart from the Original QRW
These look a lot like the classic QRW rings, but Leupold reworked a few things that matter. The ring tops were redesigned for easier installation, the keeper got improved, and there's a bigger contact area where the ring meets the base. More contact means a more precise, repeatable fit and better stability under recoil, which is exactly what you want when you're running standard to magnum calibers.
Steel Build and High Ring Height
The QRW2 rings are precision machined from solid steel, so they carry the same rugged, no-nonsense dependability Leupold puts into its optics. This set is the high height option, measuring 1.17 inches, giving you the clearance needed for larger objective lenses or chunky scope profiles without crowding the barrel. The matte black finish keeps things low-key and glare-free in the field.
Dialing In the Leupold QRW2 Rings
Leupold spec's the keeper clamp torque and ring top screws at 25 inch-pounds each, so a decent torque wrench makes setup painless and keeps everything consistent. Pair these with a solid cross-slot base and you've got a mounting setup that holds up to serious use and gives you the freedom to swap your glass when you need to.
Key Specifications
- Model: QRW2
- Manufacturer: Leupold
- Manufacturer Part Number (MPN): 177274
- UPC: 030317022525
- Ring Diameter: 34mm
- Ring Height Style: High
- Ring Height: 1.17 in
- Material: Steel
- Finish: Matte Black
- Base Cant: No
- Mount Type: Quick Release / Cross-Slot (Weaver & Picatinny compatible)
- Keeper Clamp Torque: 25 in-lbs
- Ring Top Screw Torque: 25 in-lbs
- Weight: 6.4 oz
- Country of Origin: United States
What’s Included
- One pair of Leupold QRW2 34mm High Matte scope rings
- Mounting hardware
- Mounting instructions
Frequently Asked Questions
Will the Leupold QRW2 34mm rings hold zero if I remove and reattach my scope?
Yes, that's the whole point of the quick-release design. The patented lever mechanism locks the ring back into its zero position, returning you to within 1/2 MOA of your original point of impact. It's a great option if you travel with your rifle or need to pull the optic for storage.
What bases do the QRW2 34mm rings fit?
They're part of Leupold's Cross-Slot mounting system, so they fit QRW and PRW bases along with any other Weaver or Picatinny style cross-slot rail. Leupold offers both one-piece and two-piece bases for a lot of popular rifles. Just make sure your base is a cross-slot style and you're good to go.
Are these rings tall enough to clear a large objective scope?
This is the high version, measuring 1.17 inches, which gives you solid clearance for larger objective bells and bulkier scope bodies. If you're running a big magnum optic, the high height is usually the safe call. For smaller objectives you may be able to go lower, so check your scope's objective diameter against a ring height chart.
What torque should I use when installing the QRW2 rings?
Leupold spec's both the keeper clamp and the ring top screws at 25 inch-pounds. Using a quality torque wrench keeps the fit consistent and helps your scope stay put under recoil. Snug and even is the name of the game, so don't just crank them down by feel.





Reviews
There are no reviews yet.