Q Honey Badger 15″ M-LOK AR Handguard Kit | Grey

Description

The Q Honey Badger 15" M-LOK Handguard Kit is the long-and-lean option in Q's forend lineup. It gives you the most rail space of any Honey Badger handguard, which means more room to run a forward grip, spread out your accessories, and get your support hand exactly where you want it. It bolts onto M4 and AR-15 correct Mil-spec upper receivers, so you can drop it on a dedicated Honey Badger or use it to finish a custom build.

Under the hood it's cut from 6061-T6 aluminum, the same tough, lightweight alloy Q uses across the whole handguard family. That keeps the front end nimble even at this longer length. A full-length 1913 Picatinny top rail runs the length of the handguard for optics, backup irons, or night vision, while M-LOK slots around the tube let you mount lights, lasers, hand stops, and sling hardware right where you need them with minimal bulk.

What Sets the 15" Honey Badger Handguard Apart

Length is the whole story here. Where the 6" and 12" versions lean toward compact and suppressed builds, the 15" gives you extended coverage over the barrel and gas system, a longer sight radius for irons, and plenty of grip options for a two-handed hold. The free-floating design also keeps hardware off the barrel for more consistent shooting.

Getting the 15" Honey Badger Kit Installed

This is the complete kit, so it ships with the handguard, the proprietary Q barrel nut, and the turnbuckle tensioning hardware. Q calls for the barrel nut to be torqued to 50 ft-lbs, with the turnbuckle brought to hand tight and locked in with red Loctite. You'll want a 1.25" open-end wrench and a 1/4" SAE open-end wrench on hand, since tools are not part of the kit. Worth noting up front: these handguards will not clear Q's Trash Panda, Thunder Chicken, Half Nelson, or Full Nelson suppressors, so plan your can setup accordingly.