Description
Anybody who has cleaned an AR-15 without a bore guide knows the drill: solvent dripping back into the lower, the rod wandering around and rubbing against the chamber, and a rag stuffed in the mag well trying to catch the runoff. The Pro-Shot BGAR15 fixes all of that. It slides right into the upper where your bolt carrier group normally sits, giving your cleaning rod a straight, centered path down the bore and shielding the internals from the stuff you do not want in there.
What the BGAR15 Bore Guide Does on the Bench
With the guide in place, the rod stays aligned instead of dragging across the chamber throat, which is where a lot of avoidable wear comes from. The O-ring tip seals up against the chamber end, and the built-in solvent port lets you apply cleaner right where it needs to go without flooding the receiver. That means the solvent and loosened fouling head out the muzzle instead of pooling around your trigger group.
Delrin Build on the Pro-Shot BGAR15
Pro-Shot machines this guide from Delrin, a tough acetal plastic that shrugs off the harsh solvents and bore cleaners you throw at it. It will not eat through after a few sessions, and it holds up to repeated cleanings without swelling or cracking. It is also easy on your barrel finish, so there is no worry about scuffing anything up during a normal maintenance routine.
This one is sized for the .223 Remington and 5.56 NATO chamber and works across the whole AR15, M16, and M4 family. Whether you are running a 16-inch carbine or a 20-inch rifle, the guide fits the standard mil-spec platform and makes the whole job cleaner, faster, and a lot less frustrating. It is a small piece of gear that earns its keep every time you break the rifle down.
Key Specifications
- Manufacturer: Pro-Shot
- Manufacturer Part Number: BGAR15
- UPC: 709779600540
- Product Type: Bore Guide
- Caliber: 5.56mm / .223 Cal
- Fits: AR15 / M16 / M4 family
- Material: Delrin (chemical resistant)
- Tip Feature: O-Ring
- Solvent Port: Yes
- Bristle Type: None
- Quantity: 1
What’s Included
- 1 Pro-Shot BGAR15 AR-style bore guide
Frequently Asked Questions
How does the Pro-Shot BGAR15 install on my AR-15?
You pull the bolt carrier group out of the upper and slide the bore guide in its place. The guide seats into the receiver and lines up with the chamber, so your cleaning rod runs straight down the bore. No tools needed and it comes right back out when you are done.
Will this bore guide work with both 5.56 NATO and .223 Remington rifles?
Yes. It is built for the .223 Remington and 5.56 NATO chamber, which share the same dimensions at the bore guide end. It fits across the AR15, M16, and M4 family of rifles.
What is the solvent port on the Pro-Shot bore guide for?
The port gives you an opening to apply bore cleaner directly onto your patch or brush while the guide is installed. That keeps the solvent headed down the barrel instead of dripping back into the receiver and trigger group. It makes wet patching a lot tidier.
Is the Delrin material tough enough for heavy solvents?
Delrin is a chemical-resistant acetal that stands up well to bore cleaners and harsh solvents without breaking down. It handles repeated cleanings without swelling or cracking, and it is gentle on your barrel finish. This is the same material Pro-Shot uses across much of its cleaning gear.





Reviews
There are no reviews yet.