Description
There's a lot of AR-15s out there that need a trigger swap, a new charging handle, and a better rail before they feel finished. The POF-USA Minuteman is not one of them. This 5.56 NATO carbine comes out of the box with the upgrades most folks end up buying anyway, starting with POF's single-stage straight drop-in trigger breaking at a crisp 3.5 pounds, complete with KNS anti-walk pins. Add the ambidextrous Strike Eagle charging handle, ambi safety, and a QD end plate, and you've got a rifle that works the same no matter which shoulder it's riding on.
Built Around a 13.75 Inch Barrel Done Right
The heart of this Minuteman is a 13.75 inch barrel machined from 4150 CrMoV steel with a 1:8 twist, 5R rifling, and a black nitride treatment for hardness and corrosion resistance. A Dead Air KeyMo muzzle brake is pinned and welded to bring the barrel to 16.1 inches overall, which keeps the whole package short and maneuverable at just 34 inches with the stock collapsed. The brake itself tames muzzle rise nicely, and if you run a Dead Air Sandman or any KeyMo-mount suppressor, it doubles as your mount. Thread your can on and you're in business.
Renegade Rail and Smooth Mid-Length Gas
Up front sits POF's 13 inch Renegade rail with M-LOK slots, a full-length top Picatinny rail, QD points, and the patented heat sink barrel nut that pulls heat away from the chamber during longer range sessions. The mid-length gas system with a low-profile nitrided gas block keeps the recoil impulse soft and the bolt speed sensible, and the mil-spec bolt carrier group gets POF's roller cam pin to reduce wear and friction where standard carriers grind away at the upper.
Why the Minuteman Earns Its Spot
Billet aluminum upper and lower receivers wear a sharp Tungsten Cerakote finish, while the MFT Minimalist stock and Engage V2 grip keep weight down to about 6.2 pounds. It ships with a 30-round Magpul PMAG, so all that's left is mounting your optic. For a do-it-all 5.56 carbine that skips the aftermarket shopping list, this one is tough to beat.
Key Specifications
- Manufacturer Part Number: 02046
- UPC: 847313020468
- Caliber: .223 Rem / 5.56 NATO
- Action: Semi-Auto, Direct Impingement
- Barrel Length: 13.75" (16.1" with pinned and welded muzzle brake)
- Barrel Material: 4150 CrMoV steel, black nitride treated
- Twist Rate: 1:8, 5R rifling
- Muzzle Device: Pinned and welded Dead Air KeyMo brake
- Gas System: Mid-length with low-profile gas block
- Handguard: 13" Renegade M-LOK rail with heat sink barrel nut
- Trigger: Single-stage straight drop-in, 3.5 lb pull
- Stock: Mission First Tactical Minimalist, collapsible
- Grip: MFT Engage V2
- Capacity: 30+1
- Receiver Finish: Tungsten Cerakote
- Weight: Approx. 6.2 lbs
What’s Included
- POF-USA Minuteman 5.56 NATO rifle
- One 30-round Magpul PMAG magazine
Frequently Asked Questions
Can I remove the Dead Air KeyMo brake on the POF Minuteman 13.75?
No, the KeyMo muzzle brake is pinned and welded to the barrel, making it a permanent part of the rifle and bringing the total barrel length to 16.1 inches. The upside is that it works as a suppressor mount, so you can attach any Dead Air Sandman or KeyMo-compatible can directly without changing anything on the rifle.
Is the POF Minuteman suppressor ready out of the box?
Yes. The pinned Dead Air KeyMo brake accepts Sandman series and other KeyMo-mount suppressors, so your can locks right on. The sealed taper design sits forward of the locking channels, which helps prevent carbon lock so the suppressor comes off cleanly even after long range days.
Is this Minuteman a gas piston rifle like other POF models?
No, the Minuteman line uses a traditional direct impingement system with a mid-length gas setup and a low-profile nitrided gas block. POF made its name with piston guns, but the Minuteman keeps things lighter and simpler while still adding upgrades like the roller cam pin bolt carrier group and heat sink barrel nut that set it apart from standard DI carbines.
Does the POF Minuteman work with standard AR-15 magazines?
It does. The Minuteman uses the standard AR-15 magazine well and ships with a 30-round Magpul PMAG, so any quality AR-15 magazine in 5.56 or .223 will run in it. That makes finding spares easy and affordable.




Reviews
There are no reviews yet.