Description
If you run a 12 gauge shotgun with any regularity, you've probably noticed that factory followers leave something to be desired. The stock plastic units wear out, bind up in magazine tubes, and generally perform like they cost about what the manufacturer paid for them. The Phase 5 12 Gauge Shotgun Follower changes that equation entirely.
Machined from 7075-T6 aluminum bar stock right here in the USA, this follower is about 65% stronger than competitors who cut corners with the softer 6061 alloy. That extra durability means it won't degrade the way plastic does, and it maintains its smooth action through thousands of loading cycles. The anodized red finish isn't just for looks either. When you're clearing your magazine at the range or in training, that bright red color makes it immediately obvious whether you've got an empty tube or not, without having to look twice.
Reduced Bearing Surface for Binding-Free Feeding
The real magic is in the design. Most factory followers have a large bearing surface that contacts the magazine tube walls, creating drag and friction that builds up over time. This Phase 5 follower cuts that contact area down to roughly one-third of what comes stock, which means less friction, smoother feeding, and no more of those annoying hang-ups when transitioning between your factory tube and extension tube. The result is faster, more reliable loading during competitive events or any situation where you need dependable function.
Tactile and Visual Verification
The center hole punched through this follower serves dual duty. Visually, you can glance down your magazine tube and instantly see if it's empty. In low-light conditions or when you can't look directly into the tube, you can run your finger through the hole to confirm whether there's a round ready or not. It's a small detail that becomes second nature once you've used it.
Fits most factory 12-gauge magazine tubes and extension tubes that don't have spring-follower retention dimples. If your shotgun has dimples (common on some newer models), you'll need to remove them or swap the tube to accommodate this follower.
Key Specifications
- Manufacturer: Phase 5 Weapon Systems
- Model Number: 12GSF-RED
- UPC: 813318023391
- Gauge: 12 Gauge
- Material: 7075-T6 Aluminum
- Finish: Red Anodized
- Length: 6.35 inches
- Width: 1.25 inches
- Bearing Surface: Approximately 1/3 of factory follower
- Material Strength: 65% stronger than 6061 aluminum competitors
- Compatibility: Benelli M2 & M4, Mossberg 500 & 930, Remington 870, 1100 & 11-87, Stoeger M3000, Kel-Tec KSG (most factory 12GA tubes without retention dimples)
- Manufacturing: Precision machined in the USA
- Center Hole: Yes, for tactile and visual verification
What’s Included
- 1 Phase 5 12 Gauge Shotgun Follower (Red)
Frequently Asked Questions
Will this Phase 5 follower fit my shotgun?
This follower fits most factory 12-gauge magazine tubes and extensions without spring-follower retention dimples. It's confirmed compatible with Benelli M2 & M4, Mossberg 500 & 930, Remington 870/1100/11-87, Stoeger M3000, and Kel-Tec KSG models. If your tube has dimples (some newer Remington 870s), you'll need to remove them or replace the tube. Contact the manufacturer to confirm fitment on your specific shotgun if you're unsure.
Why is this aluminum follower better than the stock plastic one?
Factory plastic followers wear out quickly, flex under load, and often cause binding or feeding issues. This 7075-T6 aluminum follower is about 65% stronger than softer aluminum alternatives, maintains its shape indefinitely, and the reduced bearing surface means roughly one-third of the friction and drag. You'll notice smoother feeding, especially during rapid loading or with magazine extensions.
Does the red color help with safety checks?
Yes. The bright red anodized finish makes it instantly obvious when your magazine is empty during clearing checks, both visually and from a distance. The center hole lets you verify magazine status by feel when you can't look directly into the tube, which is especially useful in low-light conditions or tactical training scenarios.
Is installation difficult?
Installation is straightforward for most users. You remove the old follower and spring from your magazine tube and drop in the new one. If your tube has retention dimples, you'll need to drill or grind them out first. Refer to your shotgun's manual for specific disassembly steps, or consult a gunsmith if you're not comfortable doing it yourself.





Reviews
There are no reviews yet.