$56.99
9 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The .243 Winchester is one of those calibers that just keeps earning its keep, from long-range target work to reaching out on deer and antelope. What makes this Peterson offering stand out is the small rifle primer pocket. Instead of tracking down .308 brass in SRP and necking it down (which leaves you fighting a doughnut at the base of the neck and turning necks to fix it), you get purpose-built SRP brass straight out of the box.
Peterson runs this case on a modern production line that leans on tight tolerances and heavy quality control. The result is brass that shows up consistent in weight, case length, and primer pocket dimensions right from the start. Reloaders who've run it note tight primer pockets holding up over multiple firings, with minimal prep needed beyond a chamfer and a quick expander pass before seating bullets. That kind of uniformity is exactly what you want when you're chasing low extreme spread and single-digit standard deviations.
This one leans toward the precision crowd. Competition shooters and long-range folks tend to favor the small rifle primer setup for the consistency it can bring to ignition. If you're running a warmer load and worried about primer pocket life, the small pocket design has proven it holds up well under pressure during Peterson's own testing. Hunters who prefer the traditional large rifle primer route have that option in Peterson's LRP version, but for anyone working up a precision load, the SRP is the ticket.
As with any new brass, a light prep run pays off. Check your case lengths, chamfer and deburr the necks, and run an expander before your first seating. It's smart to confirm what your rifle and dies are set up for before committing to SRP brass so everything plays nice together. From there, this brass is ready to build into a load you can trust shot after shot.
The small rifle primer pocket is popular with precision and long-range shooters who want consistent ignition. Peterson built this so you don't have to neck down .308 SRP brass, which saves you the hassle of turning necks to clear the doughnut that forms at the base. It also holds up well under warmer loads during Peterson's own testing.
Not much. Reloaders generally report the primer pockets and case lengths come uniform out of the box, so you're mostly looking at a chamfer and deburr on the necks plus an expander pass before seating bullets. Always check case lengths and trim if needed on your first go.
No, this is unprimed, unloaded brass ready for your own reloading process. You'll add your choice of small rifle primer, powder, and bullet. Make sure your load data is set up for small rifle primers to get the best results.
Plenty of handloaders use Peterson 243 brass as a starting point for fire-forming into 243 AI, and many report excellent accuracy and primer pocket life. That said, confirm your rifle and dies are set up for the process before you begin. Talk with your gunsmith if you're unsure how your chamber is configured.
| UPC | 859449006681 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 40006-R |
You must be logged in to post a review.
Reviews
There are no reviews yet.