$1,040.00
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Patriot Ordnance Factory built the Minuteman upper for folks who want a direct impingement 5.56 that runs clean, stays cool, and mounts up in minutes. It ships as a finished assembly, so you drop it onto any mil-spec lower, bolt on an optic, and head to the range. No headspacing, no torque wrench, no chasing parts down a rabbit hole.
The barrel is where POF earns its reputation. You get a 16.5" barrel cut from 4150 CrMoV steel, nitride heat treated inside and out, with a 1:8 twist and 5R rifling that plays nice with everything from lightweight varmint loads to heavier match bullets. A mid-length gas system with a low-profile gas block gives you that softer, more balanced recoil impulse the 16.5" length is known for, and the 1/2×28 muzzle threads wear a three-prong flash hider out of the box.
Wrapped around the barrel is POF's Renegade M-LOK handguard, one of the slimmest rails they make. It rides on the patented oversized heat sink barrel nut, a three-inch aluminum piece that shrouds the chamber and throat to pull heat away fast, which matters a lot during longer strings of fire. The rail carries M-LOK slots at 3, 6, and 9 o'clock plus four integrated QD sling points, so mounting lights, grips, and slings is straightforward.
The real trick lives in the bolt carrier group. POF swaps the standard square cam pin for their NP3-coated roller cam pin, which rolls inside the receiver channel instead of dragging across it. That cuts friction and extends the life of the upper. Add the E2 dual-extraction chamber that helps break the case free during extraction, and you've got an upper that keeps cycling when things get hot and dirty. Round it out with the ambidextrous Strike Eagle charging handle and this is a build platform that punches well above a plain mil-spec upper.
It ships as a finished upper assembly, including the barrel, handguard, gas system, bolt carrier group, and charging handle. All you need is a mil-spec AR-15 lower and an optic or iron sights. Drop it on, mount your glass, and you're ready for the range.
Yes. The upper is machined to standard mil-spec M-16/M4 dimensions with M4 feed ramps, so it pins onto any correctly cut AR-15 lower receiver. It's a genuine drop-on fit with no fitting or gunsmithing required.
A standard square cam pin drags and wears against the inside of the upper receiver during cycling. POF's NP3-coated roller cam pin rolls along that channel instead, which reduces friction and helps extend the life of the upper. It's one of the features that separates the Minuteman from a basic mil-spec build.
The 16.5" barrel pairs naturally with a mid-length gas system, which slows down the timing of the action and softens the recoil impulse compared to a carbine-length setup. The result is a smoother, flatter-shooting rifle that's easier on both the shooter and the internals. It's a great match for range work, training, and general-purpose use.
| UPC | 847313016522 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 01652 |
| Action | |
| Barrel Finish | Black Nitride |
| Barrel Length | 16.5" |
| Caliber/Gauge | .223 REM/5.56 NATO |
| Sights | None, Optic Ready |
You must be logged in to post a review.
Reviews
There are no reviews yet.