0
0

Otis Ripcord .270/6.8mm/7mm 36in Bore Cleaning Rope

UPC: 014895003138

$12.99

41 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

When you're done shooting and want to knock the fouling out before it sets up, the Otis Ripcord is about as quick as it gets. This 36-inch pull-through drops into your .270, 6.8mm, or 7mm barrel and runs Breech-to-Muzzle in one motion. The core is a molded rubberized helix that keeps the braided Nomex surface pressed firmly into the rifling, so you get a full 360-degree scrub instead of a strip of fabric just dragging along one side of the bore. Ten inches of that surface is the aggressive cleaning section that does the heavy lifting on carbon and copper fouling.

What Sets the Ripcord Apart from a Bore Snake

The big difference is the stiff, memory-flex core. A regular bore snake needs you to drop it muzzle-down and let gravity carry the weighted string through. The Ripcord is rigid enough that you just feed it in and pull, which means you can clean from a standing position in the field without fussing with the muzzle end. The Nomex fibers pull double duty here, working like a brush to break loose fouling and like a patch to trap and carry it out.

Built for Hot Barrels and the Field

Nomex is the same flame-resistant material used in firefighter gear, and it shrugs off heat up to 700 degrees. That means you don't have to wait for a barrel to cool down after a range session or a long day chasing game. It's lightweight, rolls up small, and tosses right into a pack or range bag.

Ripcord Compatibility and Add-Ons

Both ends carry 8-32 threads, so they mate up with the rest of the Otis cleaning lineup. You can thread on a bore brush for a deeper scrub, add a slotted tip and patch, or attach a T-handle to make pulling easier on tight bores. Otis builds these in the USA and backs them with a limited lifetime warranty, so it's the kind of tool you buy once and keep in the bag for years.

Key Specifications

  • Manufacturer: Otis Technology
  • Manufacturer Part Number: FGRC327
  • UPC: 014895003138
  • Caliber: .270 Cal / 6.8mm / 7mm
  • Product Type: Bore Clean Rope
  • Overall Length: 36 in
  • Aggressive Cleaning Surface: 10 in
  • Thread Pattern: 8-32
  • Core: Molded rubberized helix / Memory-Flex cable
  • Cleaning Surface Material: Braided Nomex
  • Heat Resistance: Up to 700°F
  • Cleaning Direction: Breech-to-Muzzle
  • Quantity: 1
  • Country of Origin: USA
  • Warranty: Limited Lifetime

What’s Included

  • Otis Ripcord .270/6.8mm/7mm 36in bore cleaning rope (1)

Frequently Asked Questions

Will the .270 Ripcord also work for my 7mm and 6.8mm rifles?

Yes. This Ripcord is molded specifically for .270 caliber, 6.8mm, and 7mm bores, all of which share a close enough diameter to get the proper 360-degree contact. Using it on those calibers is exactly what it's designed for, so you'll get the firm fit needed for an effective clean.

How is the Ripcord different from a regular bore snake?

The Ripcord has a rigid, helix-shaped rubber core that stays stiff enough to feed into the bore without needing to gravity-drop it like a bore snake. That core also keeps the Nomex surface pressed hard into the rifling for a more aggressive clean. It cleans Breech-to-Muzzle in one pass, which many find faster and less fiddly than a traditional snake.

Can I attach a bore brush or other accessories to the Ripcord?

Absolutely. Both ends are cut with 8-32 threads, so they fit the full range of Otis cleaning components. You can thread on a bore brush for a deeper scrub, add a slotted tip and patch, or connect a T-handle to make pulling it through easier.

Can I use the Ripcord on a hot barrel right after shooting?

You can. The braided Nomex surface handles heat up to 700 degrees, so there's no need to wait for the barrel to cool. That makes it handy for quick cleanups between strings at the range or out in the field.

Additional information

UPC

014895003138

Manufacturer

Manufacturer Part Number

FGRC327

Caliber/Gauge

.27 CALIBER

Length

36"

Product Type

BORE CLEAN ROPE

Thread Pattern

5-40"

Reviews

There are no reviews yet.

Be the first to review “Otis Ripcord .270/6.8mm/7mm 36in Bore Cleaning Rope”