Description
If you run a Glock, this is the kit that keeps it running like it should. Otis built the Professional Pistol Cleaning Kit specifically around Glock pistols chambered in 9mm, .40 S&W, and .45 ACP, and it goes well past a basic rod-and-patch setup. You get real bore cleaning, field-ready tools, and the odd-but-useful stuff like magazine plate removal all packed into one place.
What Sets the Otis Glock Cleaning Kit Apart
The heart of it is Otis's Breech-to-Muzzle system. Instead of pushing a rod from the muzzle end, you pull a coated Memory-Flex cable through the barrel in the same direction the bullet travels, which keeps grit moving out and away from the crown and rifling. It runs with three bronze and three nylon bore brushes, a slotted tip, patches, and an obstruction remover, so you can go as light or as deep as the job calls for.
Field Cleaning With the Otis Pistol Kit
The kit includes three caliber-matched Ripcords, one each for 9mm, .40, and .45. The Ripcord is a helix-shaped, Nomex-wrapped cord you pull through the bore in a single pass, and because that braided surface handles serious heat, you can clean a barrel that's still warm right off the line. There's also a steel pistol loop rod and square patches for a quick patch-through when you just want to lay down some lubrication. Shooter's Choice FP-10 Lubricant Elite is in the box to clean, lube, and protect in one step.
More Than a Bore Kit
Where this one earns the "professional" name is the hand tools. The 8-in-1 pistol T-Tool handles resetting pins, pushing takedown pins, front sight adjustments, and general detail work, and the magazine plate removal tool lets you pop apart your mags for a proper cleaning instead of leaving grit down in the spring. A double-ended nylon AP brush knocks out large surfaces and tight spots, and Otis even throws in a patriotic slide back plate to dress up your Glock. It's made in the USA and backed by Otis's limited lifetime warranty.
Key Specifications
- Manufacturer: Otis Technology
- Manufacturer Part Number: FG901945
- UPC: 014895012529
- Style: Kit
- Compatible Calibers: 9mm, .40 S&W, .45 ACP
- Intended Firearm: Glock pistols
- Cleaning System: Breech-to-Muzzle Memory-Flex
- Bore Brushes: 3 bronze, 3 nylon
- Ripcords: 3 (9mm, .40 cal, .45 cal)
- Lubricant: Shooter's Choice FP-10 Lubricant Elite
- Multi-Tool: 8-in-1 pistol T-Tool
- Country of Origin: Made in the USA
- Warranty: Limited Lifetime Warranty
What’s Included
- 3 bronze bore brushes
- 3 nylon bore brushes
- 3 Ripcords (9mm, .40 cal, .45 cal)
- Memory-Flex cable and components
- Slotted tip
- Obstruction remover
- Cleaning patches and square patches
- Steel pistol loop rod
- Shooter's Choice FP-10 Lubricant Elite
- Double-ended nylon AP brush
- 8-in-1 pistol T-Tool
- Magazine plate removal tool
- Patriotic slide back plate
Frequently Asked Questions
What Glock calibers does the Otis Professional Pistol Cleaning Kit cover?
It's set up for Glock pistols chambered in 9mm, .40 S&W, and .45 ACP. The bore brushes and the three included Ripcords are matched to those calibers, so you're covered whether you're running a G17, G22, G21, or similar. One kit handles your whole Glock lineup in those chamberings.
How does the Breech-to-Muzzle cleaning work in this kit?
Rather than pushing a stiff rod down from the muzzle, you pull a coated Memory-Flex cable through the barrel in the direction the bullet travels. This carries fouling out the muzzle and helps protect the crown and rifling from rod wear. It's the same method Otis built its reputation on.
What is the Ripcord and why are there three of them?
The Ripcord is a helix-shaped cord wrapped in braided Nomex that you pull through the bore for a fast, single-pass clean. The kit includes one sized for 9mm, one for .40, and one for .45 so each caliber gets a proper fit. Because the Nomex handles high heat, you can run it on a barrel that's still warm from shooting.
Can the Otis Glock kit clean magazines too?
Yes. It comes with a magazine plate removal tool that lets you pop the baseplate off and get down into the mag body and spring where grit tends to collect. That's a step a lot of basic kits skip, and it makes a difference in feeding reliability over time.





Reviews
There are no reviews yet.