Description
Otis built the Ripcord for those moments when you want your 20 gauge cleaned right now, not back at the bench an hour later. Instead of scrubbing back and forth with a rod, you drop the cable through the breech and pull it out the muzzle in one motion. The rigid, three-bulb rubber core holds the cleaning surface tight against the bore the whole way through, and there is no gravity feed involved, so it works no matter which way the barrel is pointed. Around 10 inches of that 45-inch cable is dedicated aggressive cleaning surface, which is what does the actual work.
What Makes the Ripcord Different from a Bore Snake
The braided outer layer is Nomex, the same heat-resistant fiber used in firefighting gear. It pulls double duty, working like a brush to knock fouling loose and like a patch to carry that residue out with it. Because Nomex handles heat up to 700 degrees, you can run this thing right after a hunt or a round of clays without waiting for the barrel to cool down. That heat tolerance is the reason a lot of folks keep one in the truck or the blind.
Pairing the 20 Gauge Ripcord with Your Kit
Both ends carry 8-32 threads, which is the Otis standard, so the Ripcord plays nice with the rest of their cleaning components. Thread on a bore brush for a deeper scrub, or add a patch loop with a few drops of solvent when you want to run it wet. It comes with a Bore Reflector+ chamber flag that screws onto the cable and doubles as a pull handle, so you have something solid to grab instead of wrestling the bare cable.
It is made in the USA and backed by Otis' no-nonsense limited lifetime warranty. Toss it in a range bag, a blind bag, or a glovebox and forget about it until you need a fast, effective clean.
Key Specifications
- Manufacturer: Otis Technology
- Manufacturer Part Number: FG-RC-520
- UPC: 014895004388
- Caliber/Gauge: 20 Gauge
- Product Type: Pull-Through Bore Cleaner
- Overall Length: 45 inches
- Cleaning Surface: 10 inches
- Core: Rigid 3-bulb helix rubber core
- Cleaning Material: Braided Nomex fiber
- Heat Resistance: Up to 700 degrees F
- Thread Pattern: 8-32 threaded ends
- Country of Origin: Made in USA
- Warranty: No-Nonsense Limited Lifetime Warranty
What’s Included
- Otis Ripcord 20 Gauge one-pass bore cleaner
- Bore Reflector+ chamber flag with 8-32 thread that doubles as a pull handle
Frequently Asked Questions
Can I use the Otis Ripcord wet with solvent or oil?
Yes, you can run the Ripcord dry or wet. A few drops of solvent or oil on the front end, or a solvent-soaked patch attached to the threaded tip, gives you a deeper clean. Running it while the barrel is still warm helps break fouling loose more easily.
What does the 8-32 thread on the Ripcord let me attach?
Both ends of the Ripcord have 8-32 threaded ferrules, the same standard used across the Otis lineup. That lets you thread on bore brushes, mops, patch loops, or other Otis cleaning components for a more thorough job. The included Bore Reflector+ also screws onto that thread to serve as a pull handle.
Is the 20 gauge Ripcord reusable, and how do I clean it?
It is built for repeated use, not a one-and-done tool. Once the Nomex gets loaded with fouling, you can hand wash it, let it dry, and put it back in service. The Nomex braid and rubber core hold up to a lot of passes over the life of the cleaner.
Will this Ripcord work for other gauges besides 20?
No, this one is molded specifically for 20 gauge bores so the core presses the cleaning surface tight against the walls. Otis makes caliber and gauge specific Ripcords for everything from .17 caliber up through 12 gauge. Match the Ripcord to your bore for the best contact and cleaning.




Reviews
There are no reviews yet.