$12.99
8 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Otis 410 Ripcord is about as no-fuss as bore cleaning gets. Feed the tapered end into the breech, pull it straight through to the muzzle, and you're done. There's no gravity feed to fight with and no cleaning rod to assemble, which is exactly why so many folks keep one tucked in a range bag or truck box for those days when a full sit-down cleaning session just isn't happening.
The heart of this thing is a caliber-specific molded rubber core shaped in a helix. That rigid twist keeps the cleaning surface pressed firmly against the bore wall for a full 360-degree wipe on every pass. Wrapped around it are braided Nomex fibers with three leading edges that both scrub loose the fouling and grab it on the way out, working like a brush and a patch at the same time. The whole cord runs 45 inches long, which gives you plenty of length to get a solid grip and pull it clean through a .410 barrel.
One of the smarter details here is the heat tolerance. The Nomex surface handles up to 700 degrees, so you can run it through a barrel that's still warm from shooting instead of waiting around for it to cool. Warm barrels actually shed fouling a little easier, so there's a real advantage to cleaning right at the bench. You can use it dry for a quick knockdown or add a few drops of solvent or CLP to the front end when you want to dig deeper.
Both ends carry 8-32 threads, the same standard across Otis cleaning gear, so you can thread on a bore brush, jag, or patch loop when you want a more aggressive scrub. It ships with a Bore Reflector+ that threads onto the cord and doubles as a handle to make pulling easier while it lights up the bore for inspection. It's made in the USA and backed by Otis's no-nonsense warranty.
Feed the tapered end into the breech and pull the cord straight through to the muzzle in one continuous motion. There's no gravity feed or cleaning rod involved, which is what makes it so quick. For a deeper clean, add a few drops of solvent to the front or thread on a bore brush before you pull it through.
Yes. The braided Nomex surface handles up to 700 degrees, so you can run it through a barrel that's still warm from shooting. Cleaning while warm actually helps loosen fouling, so it's a good habit right at the range or in the field.
Both ends have 8-32 threads, which is the standard across the Otis cleaning lineup. That means you can thread on a bore brush, jag, or patch loop for a more aggressive scrub when you need it. The included Bore Reflector+ threads on as well and works as a pull handle.
Either works. Run it dry for a fast field cleanup, or add a few drops of solvent or CLP to the front end when you want to cut through heavier fouling. When the cord gets dirty, most fouling sheds off on its own, and you can hand-wash it with mild soap and water if it needs it.
| UPC | 014895018026 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | FGRC541 |
You must be logged in to post a review.
Reviews
There are no reviews yet.