Description
The AccuBond Long Range line came about when serious long-range hunters wanted a bullet that could keep pace with today's high-grade optics and fast magnum cartridges without giving up terminal performance on game. This 7mm (.284 diameter) 175-grain Spitzer boat tail is one of the heavier, higher-BC offerings in that family, and it's a go-to for folks loading up 7mm Rem Mag, 28 Nosler, 7mm PRC, and similar cartridges built for reaching out there.
What makes it tick is the combination of a bonded lead core and a tapered copper jacket. That jacket is thinner at the nose and gets progressively thicker toward the boat tail base, which lets the bullet open up reliably at lower downrange velocities while still holding together when it hits up close at full speed. The bonding process keeps the core and jacket locked together for strong weight retention and deep penetration, so you don't run into the "too close" problem that can plague other high-BC hunting bullets.
What Sets the AccuBond LR 7mm 175 gr Apart
Nosler rates this bullet with a G1 ballistic coefficient of 0.648 and a G7 of 0.326, with a sectional density of 0.310. The gray polymer tip resists deformation under recoil in the magazine, helps with smooth chambering, and boosts the BC for flatter trajectories. The long, sleek ogive is designed to shoot accurately in a wide variety of rifles without needing to be seated right up against the lands, which makes load development a lot less fussy.
Dialing In the AccuBond Long Range 175 Grain
Minimum impact velocity for reliable expansion is 1,300 fps, well below the 1,800 fps that Nosler's standard hunting bullets want, which is exactly what extends its useful envelope out past 1,000 yards. Nosler recommends running the G7 BC for the most accurate trajectory solutions when you're punching numbers into a ballistic calculator. These are component bullets for reloading, not loaded ammo, so you'll be bringing your own brass, powder, and primers to the bench.
Key Specifications
- Manufacturer: Nosler
- Model: AccuBond Long Range
- Manufacturer Part Number: 58517
- UPC: 054041585170
- Caliber: 7mm
- Bullet Diameter: 0.284 in
- Bullet Weight: 175 gr
- Bullet Profile: Spitzer
- Bullet Base: Boat Tail
- Tip Material: Polymer
- Core / Jacket: Bonded Lead Core, Tapered Copper Jacket
- Ballistic Coefficient (G1): 0.648
- Ballistic Coefficient (G7): 0.326
- Sectional Density: 0.310
- Overall Length: 1.540 in
- Minimum Impact Velocity: 1,300 fps
- Cannelure: No
- Quantity: 100 Per Box
- Country of Manufacture: United States
What’s Included
- 100 Nosler AccuBond Long Range 7mm 175 gr Spitzer Boat Tail bullets
Frequently Asked Questions
Is the Nosler AccuBond LR 7mm 175 gr loaded ammunition or a reloading component?
These are component bullets for handloading, not loaded ammo. You'll supply your own brass, powder, and primers to assemble finished cartridges. Each box holds 100 projectiles.
What is the ballistic coefficient of the AccuBond Long Range 175 grain bullet?
Nosler lists it with a G1 BC of 0.648 and a G7 BC of 0.326, along with a sectional density of 0.310. Those numbers put it among the flatter-shooting 7mm hunting bullets out there. Nosler recommends using the G7 value for the most accurate trajectory solutions in your ballistic calculator.
At what distance does the AccuBond LR still expand reliably?
This bullet is designed to expand at impact velocities down to 1,300 fps, compared to the 1,800 fps minimum of Nosler's standard hunting bullets. That lower threshold is what lets it perform on game out past 1,000 yards when launched from a capable cartridge. The bonded core and tapered jacket keep it together at close-range velocities too.
Do I need to seat these bullets close to the lands for good accuracy?
No. The long ogive on the AccuBond LR was designed to shoot accurately in a wide variety of rifles without being loaded right up against the lands. That gives you more flexibility during load development and tends to make finding an accurate load less of a chore.








Reviews
There are no reviews yet.