Description
The Redding 81155 is a dedicated neck sizing die for the .308 Winchester and .307 Winchester, and it does one job extremely well. Instead of working the entire case like a full-length die, it reshapes only the neck of your fired brass. That leaves the body and shoulder fire-formed to your rifle's chamber, which is where a lot of the accuracy gains come from and why bolt-action reloaders reach for this style of die. Because it works brass minimally, your cases stretch less, which means fewer trim sessions and longer case life.
Why the Redding Neck Sizing Die Pays Off at the Bench
Neck sizing keeps the fire-formed fit of your brass intact, so rounds seat consistently in the same rifle they were fired in. One thing worth knowing: since this die doesn't touch the shoulder or body, cases that have been neck sized only are meant to go back into the same rifle. If you swap brass between different rifles of the same caliber, you'll want to full-length size instead. For a dedicated load worked up for one bolt gun, this is exactly the tool for the job.
Build Quality Behind the 81155
This is classic Redding manufacturing. The dies are cut from quality alloy steel and machined on Hardinge super-precision lathes, then heat treated in controlled furnaces and hand polished for smooth operation. The body uses the industry-standard 7/8-14 thread, so it threads right into any standard reloading press. Inside, the die carries a decapping rod assembly with a neck expander button, so it deprimes and sizes the neck in one stroke.
What You Get in the Box
The Redding neck sizing die ships in the brand's familiar box that doubles as a cartridge loading block and storage case. You'll also find a spare decapping pin, a hex wrench for adjustments, and a slot to stash your shellholder so everything for that caliber stays together. It's a thoughtful touch that keeps your bench organized caliber by caliber.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 81155
- UPC: 611760811555
- Cartridge: 308 Winchester / 307 Winchester
- Die Style: Neck Sizing Die
- Die Series: Series A
- Case Type: Bottleneck
- Thread: 7/8-14 (industry standard)
- Material: Alloy steel
- Quantity: 1 die
- Country of Origin: United States
- Shipping Weight: 0.65 lb
What’s Included
- Redding neck sizing die (1)
- Decapping rod assembly with neck expander button
- Spare decapping pin
- Hex wrench
- Storage box with built-in loading block and shellholder slot
Frequently Asked Questions
What does the Redding neck sizing die actually resize?
It sizes only the neck of your fired .308 or .307 Winchester brass and leaves the shoulder and body fire-formed. That minimal working of the brass is what helps extend case life and improve accuracy. The die also deprimes the case and expands the neck in the same stroke thanks to the built-in decapping rod and expander button.
Can I use neck-sized brass in a different rifle?
It's best to keep neck-sized brass in the same rifle it was fired in. Since this die doesn't size the shoulder or body, those cases are fit to one specific chamber. If you need rounds that chamber across multiple rifles of the same caliber, use a full-length sizing die instead.
Will the Redding 81155 fit my press?
Yes. It uses the industry-standard 7/8-14 threaded body, so it threads into any standard single-stage or turret reloading press. You'll just need the correct shellholder for the .308 Winchester case head.
Is this die a good fit for bolt-action reloading?
It's one of the most popular choices for exactly that. Neck sizing shines with bolt guns where you're loading brass back into the same rifle and chasing tighter groups with longer-lasting cases. Precision and benchrest shooters favor this approach for dialed-in loads.




Reviews
There are no reviews yet.