$21.99
82 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Anyone who works on their own AR knows the frustration of needing four different tools to change out a stock, time a flash hider, or crack loose a stubborn barrel nut. The NcSTAR AR-15 Combo Armorer's Wrench folds those jobs into a single piece of steel, so you can grab one tool off the bench and get to work instead of digging through a drawer.
This is a true combo wrench built around the AR-15, M4, and M16 platform. It includes a barrel wrench sized for GI barrel nuts, wrench cutouts for both A1 and A2 flash suppressors so you can install and time your muzzle device cleanly, and castle nut wrenches that cover the older single-pin stocks as well as the newer M4 collapsible setups. There's also a flat blade screwdriver worked into the tool for buttstock screws and other slotted hardware you'll run into on a build.
The wrench is made from steel with a black powder coat finish, and at 12.7 inches long it gives you the reach to break loose hardware that was cranked down at the factory. It weighs right around 20 ounces, so it has the heft you want when you're leaning into a tight castle nut without feeling clumsy on the bench. Owners consistently point to the versatility and solid feel as the reasons it earns a spot in the toolbox.
A 1/2-inch square drive opening is built right into the body, which means you can pop a torque wrench on it and dial your barrel nut in to spec rather than guessing. That's the part a lot of folks overlook until they're staring at a torque chart. Between that and the multiple wrench profiles, it's a sensible starting point for a first-time builder and a handy backup for anyone already running a full armorer's bench.
It covers the core AR maintenance and build tasks in one tool. You get a barrel wrench for GI barrel nuts, wrench profiles for old single-pin and new M4 collapsible stock castle nuts, cutouts for A1 and A2 flash suppressors, and a flat blade screwdriver. There's also a 1/2-inch square drive opening for torque-wrench use.
Yes. The tool has a 1/2-inch square drive opening built into the body, so you can attach a torque wrench and tighten your barrel nut to the correct spec. That takes the guesswork out of getting your torque values right on a build.
This Generation 1 wrench is built primarily around standard GI-spec barrel nuts. It will not fit every proprietary or free-float barrel nut, including some brand-specific designs, so it's worth confirming your barrel nut style before ordering. For GI-spec AR-15, M4, and M16 hardware it does the job well.
It's built from steel with a black powder coat finish for durability. At 12.7 inches long and roughly 20 ounces, it gives you the leverage and weight needed to break loose factory-torqued barrel nuts and castle nuts without flexing.
| UPC | 814108012939 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | TARW |
| Blade Length | 12.7" L |
| Color | Black |
| Model | |
| Product Type | Wrench |
| Shipping Weight | 1.485 |
You must be logged in to post a review.
Reviews
There are no reviews yet.