Description
The Midwest Industries Combat Rifle Flip Front Sight is one of those parts you bolt on and stop thinking about. It rides at just .437 inches when folded, which keeps it tucked out of your sight picture and clears the way for a red dot or magnified optic sitting up top. Flip it up and it locks in at Mil-Spec height, giving you a familiar sight plane that pairs cleanly with a standard AR rear sight.
The build is a smart mix of materials. You get an ordnance-grade phosphate-finished steel tower on top of a hardcoated 6061 aluminum base, so it shrugs off knocks without adding much weight to your rifle. The whole thing tips the scales at right around 1.4 ounces. It's made in the USA and backed by the Midwest Industries lifetime warranty, which tells you where they stand on it lasting.
What Sets the Combat Rifle Front Sight Apart
The standout here is the dual locking detent springs. Instead of a flimsy button setup, this thing snaps up with a firm, positive click and stays put whether it's deployed or stowed. Folks who've run these next to other popular folding sights consistently point out how solid they feel by comparison, with no wiggle once you flip them into position. It takes a standard A2 front sight post, so elevation adjustments run 1.5 MOA per click using the same A2 tool you probably already own.
Running the MI Flip Front Sight With an Optic
Because of that low folded height, this sight is a natural fit for co-witnessing. Mounted on a railed gas block that sits below your upper, it lines up for a full or lower-third co-witness depending on your optic and rear sight combo. Shooters running red dots have reported dialing in a near-perfect zero with minimal fuss. If your primary optic ever goes down, you've got a dependable backup that deploys in a heartbeat. Torque the clamp screw to 35 inch-pounds during install and you're good to go.
Key Specifications
- Manufacturer: Midwest Industries
- Model: Combat Rifle Sight
- Manufacturer Part Number: MICRSF
- UPC: 816537017653
- Product Type: Flip Up Front Sight
- Fits: AR-15 / M4 / M16 and similar platforms
- Folded Height: .437 in low profile
- Deployed Height: Mil-Spec
- Front Sight Post: Standard A2
- Elevation Adjustment: 1.5 MOA per click
- Tower Material: Ordnance-grade phosphate-finished steel
- Base Material: Hardcoated 6061 aluminum
- Color: Black
- Weight: 1.4 oz
- Country of Origin: USA
What’s Included
- Midwest Industries Combat Rifle Flip Front Sight
Frequently Asked Questions
Will the Combat Rifle Flip Front Sight co-witness with my red dot?
Yes. Its low .437-inch folded height is designed to clear most optics and line up for co-witnessing when mounted on a railed gas block that sits below your upper receiver. Depending on your optic and rear sight height, you can achieve a full or lower-third co-witness. Users running red dots report getting a clean zero with only minor adjustments.
What front sight post does this flip sight use, and how do I adjust it?
It uses a standard A2 front sight post, so you adjust elevation with a common A2 front sight tool that most AR owners already have. Each click moves the point of impact 1.5 MOA. Windage is handled at your rear sight, same as a traditional AR setup.
Does the MI flip front sight stay locked up on its own?
It does. The dual locking detent springs snap the sight into place with a firm click and hold it there whether it's deployed or folded down. There's no loose play, and it won't fold on its own during use, which is a big reason people trust these as backup irons.
How does this sight mount and how tight should the screw be?
It clamps onto a Picatinny rail via a set screw, typically on a railed gas block. Midwest Industries recommends torquing the clamp screw to 35 inch-pounds for a secure fit. Installation is quick and only takes a few minutes with basic tools.






Reviews
There are no reviews yet.