Description
The Forster Ultra Micrometer Seater Die in 6mm Dasher takes the trial and error out of seating depth. It carries all the straight-line seating features of Forster's original Bench Rest seater die, then adds a micrometer top so you can dial in exactly where you want your bullet to sit. A sliding sleeve inside the die holds the case and bullet in alignment before the bullet is ever press-fit into the neck, which is the whole reason these dies have earned such a strong reputation among precision handloaders for keeping runout low.
How the 6mm Dasher Ultra Micrometer Die Works
This is a non-crimping seater die. The close-fitting sliding chamber supports the case and bullet along their length and keeps everything on a common axis during seating, so the bullet goes in straight. Forster pioneered this sliding-sleeve approach, and plenty of reloaders report their 6mm Dasher loads coming off this die with runout well under a thousandth. Get a round seated close, measure it, then nudge the micrometer stem up or down to land right where you want.
Dialing In Seating Depth with the Ultra Micrometer
The micrometer adjusts in either direction and is easily set to .0005", with crisp .001" gradations that are marked in bright white so they are easy to read on the bench. For load development on the Dasher, that means chasing the lands is a matter of counting clicks instead of loosening a lock ring and creeping up on it. If you run several bullet styles in the same rifle, jot down the optimal setting for each one, then just dial it back in next session. It threads into any standard single-stage or turret press, so it drops right into most benches without fuss.
For a cartridge like the 6mm Dasher, where consistent seating depth and concentricity translate directly into tighter groups, this die is a sound investment in your load quality. Build it from Forster's hardened tool steel reputation for finish and smooth operation, and it is the kind of tool that earns its spot in a precision reloader's kit.
Key Specifications
- Cartridge: 6mm Dasher
- Die Type: Micrometer Bullet Seater Die
- Die Series: Bench Rest Ultra
- Seating Style: Non-crimping, straight-line sliding sleeve
- Micrometer Adjustment: Adjustable to .0005", marked in .001" increments
- Press Compatibility: Standard single-stage or turret presses
- Pieces In Set: 1 (seater die only)
- Manufacturer: Forster Products
- Manufacturer Part Number: U00038
- UPC: 757253999291
- Shipping Weight: 0.61 lbs
What’s Included
- Forster Ultra Micrometer Seater Die – 6mm Dasher (1)
Frequently Asked Questions
Does the 6mm Dasher Ultra Micrometer Seater Die crimp the case?
No, this is a non-crimping seater die. It holds the case and bullet in alignment through a sliding sleeve and press-fits the bullet into the neck without applying a crimp. For precision rifle loads like the Dasher, that straight-line seating is exactly what you want for low runout.
How precise is the micrometer adjustment on this Forster Dasher die?
The micrometer adjusts in either direction and is easily set to .0005", with gradations marked at .001" increments. The markings are printed in bright white, which makes them easy to read while you work. Many reloaders note the micrometer returns close to a previous setting, making it handy for swapping between bullet styles.
Will this die work with my press?
Yes. The Forster Ultra Micrometer Seater Die threads into any standard single-stage or turret press, so it fits the vast majority of reloading setups. It is a touch taller than a basic seater, which is worth noting on a crowded turret, but it installs and runs like any other threaded die.
Is this just the seater die or a full die set?
This is the seater die only, sold as a single piece. If you need to size your 6mm Dasher brass, you will want to pair it with a separate full-length sizing die. Forster offers a matching Dasher sizing die for a complete setup.




Reviews
There are no reviews yet.