Description
If you run a MEC progressive press and want repeatable 1-1/8 oz lead loads, this is the charge bar that gets you there. Machined from anodized aluminum and marked as a 502-series Progressive bar, it drops a fixed 1-1/8 oz of lead shot on the shot side while the powder side is bored to accept removable MEC powder bushings (sold separately). That setup lets you lock in your shot weight and fine-tune your powder charge independently, which is exactly how MEC reloaders build a clean, consistent recipe.
How the 502118 Charge Bar Handles Your Shot and Powder
The way it works is straightforward: the charge bar determines how much shot drops, and the bushing you pair with it determines the powder charge. Because the powder holes are bored only for bushings, you get precise, swappable metering instead of guesswork. The 502 designation means it's built for progressive machines, and it covers the shot range these presses are designed around.
What Sets This MEC Lead Shot Bar Apart
A soft insert is built in to help cut down on shearing when you're running larger shot sizes or harder lead, which keeps your charges accurate and your shot intact. One thing worth flagging before you order: lead and steel charge bars are not interchangeable, so this bar is strictly for lead shot. It's also a non-reversible design, so it's purpose-built for its job and nothing else.
Pairing the 1-1/8 oz Charge Bar With Your Press
This bar fits MEC progressive loaders like the 650 and Grabber, and it's a quick-change piece so swapping between loads is painless. Pick up the powder bushing that matches your load data, check your reloading manual or your powder maker's charts for the right combination, and you're set to run consistent 1-1/8 oz target or field loads all day. It's a simple component, but it's the heart of getting your shot weight right on a progressive setup.
Key Specifications
- Manufacturer: MEC (Mayville Engineering)
- Manufacturer Part Number: 502118
- UPC: 098489012522
- Series: 502 Progressive
- Shot Charge: 1-1/8 oz
- Shot Type: Lead
- Material: Anodized Aluminum
- Powder Side: Bored for removable MEC powder bushings (sold separately)
- Design: Non-reversible, quick-change
- Compatibility: MEC progressive presses (650, Grabber and others)
- Shipping Weight: 0.5375 lb
What’s Included
- One MEC 502118 Progressive 1-1/8 oz lead shot charge bar
Frequently Asked Questions
Does the MEC 502118 charge bar come with powder bushings?
No, the powder bushings are sold separately. The powder side of the bar is bored specifically to accept removable MEC powder bushings, which let you adjust your powder charge to match your load data. You'll want to pick up the bushing size your recipe calls for.
Can I use this 1-1/8 oz charge bar with steel shot?
No. This is a lead shot charge bar, and lead and steel charge bars are not interchangeable. If you're loading steel, you'll need a dedicated steel shot bar instead.
Which MEC presses does the 502-series charge bar fit?
The 502 designation means it's built for MEC progressive presses, including popular machines like the 650 and the Grabber. It's a quick-change bar, so swapping it in and out is simple. Single-stage presses use the 302-series bars instead.
How does the charge bar control shot and powder?
The charge bar itself sets how much shot drops, in this case a fixed 1-1/8 oz of lead. The powder bushing you pair with it controls the powder charge. That split lets you fine-tune powder independently while keeping your shot weight locked in, so always confirm the combination against your reloading manual or your powder manufacturer's data.




Reviews
There are no reviews yet.