Description
The MEC Powder Trickler is the tool that takes a charge that's close and brings it right on the money. You throw your powder slightly under your target weight with a measure, set the pan on your scale, then turn the handle to feed powder in a few kernels at a time until the scale reads exactly where you want it. The brass straw carries powder up from the hopper with each turn, giving you the slow, controlled flow that makes dialing in a charge feel almost effortless.
Why a MEC Trickler Earns Its Spot on the Bench
If you care about tight velocity spreads and consistent groups, this is where accuracy actually comes from. A powder measure gets you in the ballpark fast, but it's the trickler that lets you fine-tune to within a tenth of a grain. The ergonomic handle sits naturally in your hand, and the slip-in base accepts a variety of measures, so it plays well with whatever setup you're already running. It works across different powder types too, which matters since ball powders meter smoothly while stick powders almost always need that final top-off to hit weight.
Built Heavy to Stay Put
This is a heavy-duty, stable trickler, and that weight is the point. A trickler that slides around every time you bump the bench is a trickler that wastes your time. The MEC stays planted while you work, so you can trickle up to your charge, watch the scale climb, and stop the instant you hit your published weight. Simple, repeatable, and dependable session after session.
A Natural Match for MEC Reloaders
MEC specifically recommends this trickler to finish charges thrown with their powder measure, so it's a natural companion if you're running a MEC single-stage setup or Marksman press. That said, it isn't locked to MEC gear. Any handloader who wants exact, weighed charges will get real use out of it, whether you're loading precision rifle, working up a new load, or just chasing cleaner numbers on the chronograph.
Key Specifications
- Manufacturer: MEC (Mayville Engineering Co.)
- Manufacturer Part Number: 1088
- Model: 1311088
- UPC: 098489039604
- Type: Measure Stand Powder Trickler
- Material: Brass straw feed
- Function: Trickle powder to exact charge weight
- Base: Slip-in base accepts a variety of measures
- Handle: Ergonomic turn handle
- Width: 4.3 in
- Length: 5.5 in
- Height: 2.1 in
- Shipping Weight: 1.11 lb
What’s Included
- MEC Powder Trickler Measure Stand (#1088)
Frequently Asked Questions
How does the MEC Powder Trickler work?
You throw a charge slightly under your target weight and set the pan on your scale. Then you turn the handle, and the brass straw carries powder up from the hopper a little at a time until the scale reads your exact weight. It's the controlled, kernel-by-kernel feed that lets you fine-tune a charge instead of overshooting it.
Do I need a powder trickler if I already have a powder measure?
A powder measure gets you close and fast, but it rarely lands on an exact weight every pull, especially with stick powders. A trickler tops off that charge so you can hit your target down to about a tenth of a grain. If you want tighter velocity spreads and more consistent groups, the trickler is where that precision actually comes from.
Does the MEC Powder Trickler only work with MEC equipment?
MEC recommends it to finish charges thrown with their powder measure, so it's a natural fit for a MEC single-stage or Marksman setup. That said, it's not limited to MEC gear. Any reloader weighing charges on a scale can use it alongside their existing measure and setup.
Can I use it with different types of powder?
Yes. It handles a range of powders, which is handy because ball powders tend to meter smoothly while stick powders usually need that final trickle to reach weight. Whatever you're running, you trickle up to your published charge and stop.





Reviews
There are no reviews yet.