Description
The MEC 302-034 is the single-stage charge bar that meters out a fixed 3/4 ounce of lead shot every time you cycle your press. If you shoot a sub-gauge target load or lighter 12 gauge recipe, this is the bar that handles the shot side of the equation while a removable powder bushing takes care of the charge. It's finished in red, which makes it easy to grab the right bar off the bench when you've got a few sizes sitting next to each other.
The 302 designation tells you it's built for MEC single-stage presses, the kind of machine most folks start on and plenty of seasoned loaders never leave. That covers classics like the 600 Jr and other single-stage models in the lineup. The bar accepts removable powder bushings, sold separately, so you can fine-tune your powder throw to match whatever load data you're working from without swapping the whole bar.
What Sets the MEC 302-034 Apart at the Bench
MEC machines these bars from anodized aluminum, so they hold their dimensions and shrug off the wear that comes with thousands of cycles. The real standout is the soft insert built into the bar. It's there to keep larger or harder lead shot from shearing as the bar slides, which means cleaner cutoff and more consistent drops shell after shell. Anyone who has fought with sheared shot or inconsistent charges knows how much that matters for a tidy, repeatable load.
Picking the Right MEC Charge Bar for Your Loads
One thing worth knowing up front: lead shot bars and steel shot bars are not interchangeable, so this one is strictly for lead. The two numbers stamped on the end spell it out, 302 for single-stage and 34 for 3/4 ounce, which makes identifying it simple whether it's new in the package or riding along on an inherited press. Pair it with the correct powder bushing and you've got a reliable workhorse for cranking out quality shotshells.
Key Specifications
- Manufacturer: MEC
- Manufacturer Part Number: 30234
- UPC: 098489016933
- Product Type: Charge Bar
- Series: 302 (Single-Stage)
- Shot Charge: 3/4 oz
- Shot Type: Lead
- Caliber/Gauge: Multi-Caliber
- Material: Anodized Aluminum
- Color: Red
- Length: 6.4 in
- Powder Bushing: Accepts removable bushings (sold separately)
- Quantity: 1
What’s Included
- 1 MEC 302-034 single-stage charge bar (3/4 oz lead shot)
Frequently Asked Questions
Which presses does the MEC 302-034 charge bar fit?
The 302 series is made for MEC single-stage shotshell presses, including models like the 600 Jr. The 302 marking on the end of the bar is your confirmation that it belongs on a single-stage machine. Progressive presses use the 502 series bars instead, and the two are not interchangeable.
Does the MEC 302-034 come with a powder bushing?
No, the bar handles the shot side only, dropping a fixed 3/4 ounce of lead. Powder bushings are sold separately and thread into the bar so you can set your powder charge to match your load data. Collecting a few bushings lets you run different powders and charge weights with the same bar.
Can I use this charge bar with steel shot?
No, the 302-034 is designed for lead shot. MEC makes separate bars for steel, and the lead and steel versions are not interchangeable. Stick with lead to get the accurate metering this bar is built for.
What does the soft insert on the MEC charge bar do?
The soft insert helps prevent shearing when you're running larger shot sizes or harder lead shot. As the bar slides through its cycle, the insert allows a cleaner cutoff so your shot charge stays consistent. The result is smoother operation and more repeatable drops over long reloading sessions.





Reviews
There are no reviews yet.