Description
Your Savage short action deserves more than a factory stock, and the MDT Oryx Chassis in OD Green gives it exactly that. Machined from 6061 aluminum and hard anodized to MIL-Spec Type III, this chassis bolts your barreled action into a rigid, one-piece platform that free floats the barrel and beds the action on a solid aluminum block. The result is a rifle that shoots the same way every time you pull the trigger, without the flex and inconsistency you get from a wood or injection-molded stock.
Fitting Your Savage Short Action Into the Oryx Chassis
This particular Oryx is built for Savage 10/110 short action rifles, matching both common action screw spacings (4.275" and 4.410") and working with top or bottom bolt release models. Drop the barreled action in, run the two provided screws down to a quarter turn past snug, and you're set. The magazine well is cut for AICS-pattern short action magazines, so you can ditch the internal box mag for a detachable setup with a quicker reload (magazines sold separately).
Adjusting the Oryx Buttstock to Fit You
Length of pull runs 13 to 13.5 inches out of the box, and MDT's spacer kit lets you stretch that out further if you're running heavier layers in the field or need more room behind a scope. The cheekpiece adjusts up and down too, so you can get a proper cheek weld no matter what optic height you're running. Everything tightens down with simple set screws, no gunsmithing required.
Making the Oryx Chassis Your Own
The forend carries M-LOK slots on the underside for a bipod, light or ARCA rail, and the grip module accepts any AR15-pattern pistol grip if you'd rather swap out the one that comes with it. Add in the OD Green finish and you've got a chassis that looks as capable as it shoots, whether it's riding along on a coyote hunt or sitting on a barricade at a PRS match.
Key Specifications
- Manufacturer: MDT
- Manufacturer Part Number: 106263ODG
- UPC: 990482707538
- Color: OD Green
- Material: 6061 aluminum, MIL-Spec Type III hard anodized
- Compatible Action: Savage 10/110 Short Action, Right Hand
- Action Screw Spacing: 4.275" or 4.410" (top or bottom bolt release)
- Magazine Type: AICS-pattern short action (sold separately)
- Length of Pull: 13" – 13.5" adjustable (spacer kit extends further)
- Maximum Barrel Diameter: 1.25"
- Forend Attachment: M-LOK slots
- Grip Compatibility: AR15-pattern pistol grips (one included)
- Overall Length: 32.25"
- Approximate Weight: 4.2 lbs
- Category: Rifle Stocks/Chassis
What’s Included
- MDT Oryx aluminum chassis body (Savage short action inlet, OD Green)
- AR15-pattern pistol grip
- Two action mounting screws
- One length-of-pull spacer (pre-installed)
- Installation instructions
Frequently Asked Questions
What rifles will the MDT Oryx Chassis for Savage Short Action fit?
This chassis is built for Savage 10/110 short action rifles and covers both common action screw spacings of 4.275 and 4.410 inches, working with either top or bottom bolt release models. It's set up for right-hand actions. If you're running a Savage Axis, note that model uses a different Oryx inlet, so double check your action type before ordering.
Does the Oryx Chassis come with a magazine?
No, magazines are sold separately from the chassis itself. The magazine well is cut for AICS-pattern short action magazines, so options from MDT, Magpul, and Accurate-Mag will all drop right in and feed reliably.
Can I adjust the length of pull and cheek height on this chassis?
Yes, the Oryx buttstock ships with a length of pull between 13 and 13.5 inches, and MDT's spacer kit lets you add more if needed. The cheekpiece height adjusts independently with set screws, so you can match your scope height without shimming or gunsmithing.
Will a standard AR15 grip work on this Oryx Chassis?
Yes, the grip module is cut to accept any standard AR15-pattern pistol grip, and one is included with the chassis. If you already have a favorite grip from another build, it will swap in without any modification.




Reviews
There are no reviews yet.